-
E-mail
3241984301@qq.com
-
Phone
15312954526
-
Address
No. 79 Chongchuan Road, Chongchuan District, Nantong City, Jiangsu Province
Product Categories
Jiangsu Qiucheng Electromechanical Co., Ltd
Imported ETAS module ES582.1 from Germany
NegotiableUpdate on 03/02
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Imported ETAS module ES582.1 from Germany
Product Details
ETAS Product and Service Portfolio
The automotive industry is undergoing fundamental changes. New energy-saving vehicle power system, (partially) autonomous driving, digitalization, connectivity, and network security-The level of innovation has never been so great. At the same time, the new system must be launched faster. Electronic devices and software, as key technologies, areETASThe advantage lies in. Our solution is used for all stages of embedded software development. According to the different application areas of our customers, we divide our products and services into five key parts.
Software Engineering
F-00K-104-918
ES593.1
ES592.1
ES631.1
INCA 7.2.3
F-00K-110-991
F-00K-105-749
ES593.1-D
F00K107110
F-00K-105-448
Imported ETAS module ES582.1 from Germany
Imported ETAS module ES582.1 from Germany
-
Using simulation and rapid prototyping, new and modified features can be demonstrated in vehicles during the early stages of development. The following product series are available for use:ScodeUsed for description and optimization,ASCETUsed for security modeling and code generation,ISOLARforAUTOSARintegrate. For rapid prototyping,EHOOKSSupport bypass hook insertion, integration and configuration platformINTECRIOSupport the use of functional models with various modeling tools.
Testing and verification
F‑00K‑106‑673
F-00K-110-731
F-00K-102-584
F-00K-102-559
F-00K-001-271
F-00K-107-939
ES5321.1
ES582.1 F-00K-110-731
F-00K-105-743
F-00K-105-749
F-00K-105-448
ES415.1
F-00K-106-452
F-00K-102-584F-00K-102-559
F-00K-102-571
F-00K-001-271
F-00K-103-786
F-00K-102-556
F-00K-106-295
0-258-017-025
F-00K-106-127
F-00K-104-927
F-00K-105-292
-
-
ES592.1
-
InECUIn the early stages of development, the model is in the loop（MiL）Software in the environment（SiL）Hardware in the environment（HiL）The testing system plays a crucial role in ensuring quality. They simulate drivers-vehicle-environmentDVE）The system enables developers toPCOr test the functionality or diagnostic behavior of electronic control units in the laboratory. The intelligent and electronic control functions for automotive automation, networking, and environmental protection must be safe and reliable, and can work reliably in any situation.ETAS LABCARHardware in the loop testing system helps to widely and effectively check these functions.
Measurement, calibration, and diagnosis
-
INCASoftware tools and automotive compatible hardware in the product lineECUThe forms of measuring instruments, interfaces, and memory simulators used support obtaining measurement data, calibrating power system functions, and verifying onboard diagnostics during test driving. For model-based calibration,ETAS ASCMOIt is an ideal solution
real-time application
-
Provide a comprehensive product and service portfolio to help customers obtain reliable and secure embedded software. Including for vehiclesECUEfficient development of application softwareRTABasic software and tools for developing customized embedded softwareRTAEngineering services and professional support services for optimizing development processesRTAconsulting service.
Network security solution
S410- A/D Analog/Digital Module
ES411- Analog/Digital Module with Sensor Power Supply
ES413- Eco A/D module with sensor power supply
ES415- High definition A/D module with sensor power supply
ES420- Temperature measurement module
ES421- Eco Thermo Module
ES430/ES432- Lambda Measurement Module
ES441- Counter and Frequency Module with Sensor Power Supply
ETAS ES500 ECU and Bus Interface Module
ES51x - Network and Interface Module (ES510- Network Module); ES511- CAN, LIN interface and network module; ES512- FlexRay Network Module
ES523- CAN FD Interface Module
ES58x - Basic Interface Module (ES580- PCMCIA CAN and Bus Interface); ES581- USB CAN bus interface; ES583- FlexRay Bus Interface for USB
ES59x - Universal Interface Module (ES592E CU and Bus Interface); ES593-DE CU and bus interface; ES595E CU and bus interface; ES592 device connection interface; ES593-D device connection interface; ES595 Device Connection Interface)
ETAS ES600 Measurement Module
The compact ES600 measurement module is used together with a computer or driving recorder to collect temperature and voltage signals. The ES600 series measurement module can operate independently or in combination.
ES600- Network Module
ES610- Analog/Digital Conversion Module
ES620- Temperature Module
ES630/ES635- λ module
ES631/ES636- λ module
ES650- Temperature and Analog/Digital Conversion Module
ETAS ES700 Road Test Model
The ES700 product series is dedicated to making the collection and monitoring of in vehicle testing data, as well as ECU calibration, safer and more convenient. ES720 driving recorder
ETAS ES900 Rapid Prototype and Interface Module
The ES900 series prototype development and interface module are suitable for in vehicle applications and testing platform applications in harsh environments. The basic module ES910 is equipped with a Freescale PowerQUICCTM III MPC8548 processor.
ES910- Rapid prototyping and interface module
ES920- FlexRay module
ES921- CAN module
ES930- Multi functional I/O Module
ETAS ES1000/ES4000/ES5000 Measurement and Simulation Hardware
Hardware for rapid prototyping development, hardware in the loop, and measurement and calibration applications
ES1000.3- Cover (VME64x)
ES1120- System Controller Board
ES1135- Simulation/System Controller Board
ES1222-A - CAN and K-line card
ES1232-A - ETK interface card (1 channel, 8/100 Mbit/s)
ES1303- Analog/Digital Board (16 channels, 100 kHz/channel)
ES1321- PWM Input/Output Board (24/16-CH)
ES1325- Digital Input/Output, PWM Input/Output, and Counter Board
ES1335- Any Signal Generator Board (6 Channels)
ES1336- Angle Synchronization Measurement Board (20-CH)
ES1337- Wheel Speed Sensor Simulation Board (4-CH)
ES1385- resistor cascade board (6 channels)
ES1391- Power Controller Board (Dual Channel)
ES1392- High current switch board (5 channels)
ES1651- Carrier card (4 sockets)
PB1651ADC1- Analog/Digital Module (16 Channels)
ES4100- Cover (VME64x)
ES4105- Cover (VME64x)
PB4350DAC1- Digital/Analog Conversion Module (10 Channels)
ES4408- Electrical Load Simulation Module
ES4440- Compact Fault Simulation Module
ES4640- Powertrain junction box
ES5335- Any Signal Generator Based on PCIe Card
ES5340- Electric Simulation Board (Multi I/O)
ETAS λ measurement module
The ES430 and ES432- λ modules can meet the typical installation environment requirements of exhaust systems.
The single/dual channel ES63x - λ measurement module can be used independently or as a measurement tool in a calibration environment.
The data acquisition of ES630/ES631- λ module can be synchronized with ES400 and ES600 measurement modules.
The intelligent oxygen sensor cable in the CBs10x product series can help monitor the combustion and oxidation processes of heating systems, furnaces, and industrial equipment equipped with Bosch LSU 4.9 broadband oxygen sensors.
AWS2- Signal conditioning module is a low-cost alternative to the high-precision ES63x measurement module. AWS2 outputs the pump current and internal resistance value of the sensor in the form of voltage (depending on the sensor temperature)
ETAS ETK / XETK – ECU 接口
ETASETK interface
ETK-11.0 Parallel ETK
ETK-7.1 Parallel ETK
ETK-P20.0 Parallel ETK
ETK-P4.0 Parallel ETK
ETK-P7.0 Parallel ETK
ETAS measurement probes and cables
Products used together with ES400 measurement module
CBN40x - Insulation Measurement Probe
CBN41x - Current Measurement Probe
CBN42x - Current transducer connection cable
CBN43x - Temperature sensor connection cable
CBN10x - Insulation Measurement Probe
CBs10x - Intelligent Oxygen Sensor Cable
ETAS cables and connecting wires
power supply
F 00K 000 825 power cable
F 00K 106 273 power cable
F 00K 110 021 power cable
F 00K 106 312 power cable
F 00K 110 022 power cable
F 00K 102 584 power cable
F 00K 110 023 power cable
Ethernet connection
F 00K 106 274 Ethernet cable
F 00K 106 275 Ethernet PC connection cable
F 00K 102 559 Ethernet PC Connection Cable
F 00K 102 571 Ethernet PC Connection Cable
F 00K 104 373 Ethernet PC connection cable 1 Gbit/s
F 00K 104 374 Ethernet PC connection cable 1 Gbit/s
F 00K 104 451 Ethernet connection cable
F 00K 105 292 Ethernet connection and power cable
F 00K 110 041 Ethernet connection and power cable
F 00K 105 972 Ethernet connection and power cable
F 00K 110 029 Ethernet connection and power cable
F 00K 104 928 Ethernet link connection and power cable
F 00K 110 030 Ethernet Link Connection and Power Cable
F 00K 104 923 Ethernet Link Connection Cable
F 00K 105 676 Ethernet Link Connection Cable, Highly Flexible
F 00K 105 685 Ethernet Link Connection Cable, Highly Flexible
Power cable between F 00K 102 997 ES4451/ES4430 and LC-PWSPL, 2m5
-
With the increasing level of interconnectivity and real-time communication, automotive systems and other electronic systems urgently require comprehensive and cost-effective protection measures. As a wholly-owned subsidiary of ETAS GmbH, ESCRYPT provides highly secure IT security solutions for users' embedded systems and offers consulting and services for enterprise security and IT security production.
-
Jiangsu Qiucheng German Advantageous Imported ETAS Product Series, Serving the Chinese Automotive Industry
ETAS provides measurement, calibration, and diagnostic (MCD) development tools to vehicle manufacturers and ECU suppliers within its scope. ETAS hardware and software products form the main part of the development process, assisting engineers from developing application software for electronic control units (ECUs) to integrating in vehicle electronic systems.
Engineers use ECU/bus interface hardware and measurement modules provided by INCA and ETAS to calibrate, validate, and diagnose onboard electronic systems and obtain reliable data from these systems and automotive peripherals.
INCA provides connections for all related bus systems. It can calibrate and diagnose multiple ECUs while monitoring bus communication and collecting measurement signals. INCA supports all standard ECU description formats, as well as measurement, calibration, and diagnostic protocols.
Two sides of the same coin
The requirements of laws and regulations (such as OBD and EOBD regulations) for on-board monitoring of emission related systems have driven the demand for complex ECU on-board diagnostics. At the same time, accurately and effectively identifying faulty components in the maintenance workshop is also very important.
ODX
ODX (Open Diagnostic Data Exchange Format) declares on-board diagnostic functions and protocols in a standardized manner. The data description format of XML enables vehicle manufacturers and their suppliers to maintain all data related to the vehicle lifecycle (such as development, production, and service data) in a unified manner. ODX is a standard defined by the ASAM organization and published as the ISO 22901-1 international standard. More and more vehicle manufacturers and suppliers' diagnostic development toolchains have supported ODX.
Using INCA for ECU diagnosis and flash programming
Comprehensive vehicle diagnosis requires close collaboration between ECU development and diagnostic service development. When the off vehicle diagnostic function and ECU software are developed in parallel, they can be tested in the early stages of development
INCA follows OBD and ODX standards to make ECU diagnosis and FLASH refresh more convenient. Due to the ability to execute software functionality and service testing sequences, INCA can provide validation of diagnostic services without testing hardware.
Similar Product Recommend
