High cooling water electronic thermometer JY108B (CH)

The thermometer JY108B (CH) is used for monitoring the cooling water of blast furnaces. This thermometer has reliable technical indicators, stable performance, clear display, fast measurement, waterproof design, and simple and convenient use.highThermometer JY108B (CH)It adopts low-power large-scale integrated circuits and uses general alkaline batteries to enable the instrument to work continuously10For over a month, a reasonable design approach integrates the temperature sensor, display, and power supply into one, eliminating the need for Complicated and unsafe Power line, this instrument works in0.2MAThere is a slight current on both sides, so there is no heat or electric spark. The explosion-proof shell can be used in flammable and explosive environments,LCDThe digital display can be seen clearly outdoors and under strong light. The built-in power supply adopts a clip on installation, and when the power supply is used up, it can be easily replaced freely Remove the battery and install a new power source, using two batteries5Alkaline battery Be careful not to connect the positive and negative poles in reverse, and never short-circuit the power supply.

High cooling water electronic thermometer JY108B (CH)

Instructions for Use:

When measuring, press on the power battery, hold the sensor handle, hook the hook at the front end of the sensor onto the water pipe, and let the water flow through the measuring sensor.

When measuring, wait for the digital display to stabilize before reading.

When not measuring, be sure to turn off the power.

When the LCD screen appears in the upper left corner“?”When the battery voltage is insufficient, it indicates that it needs to be replaced in a timely manner, otherwise it will affect the measurement accuracy. The battery is located at the bottom right of the back cover of the display meter.

5. It is not allowed to measure high-temperature objects that exceed the water temperature.

6. The display table should avoid splashing water as much as possible.

7. Do not forcefully pull or bend the sensor lead wire, and do not use the sensor lead wire to hang a thermometer.

8. It is not allowed to dismantle or modify the display meter protection box, display meter, and hook head at will.

9. Use and store as far away from magnetic fields as possible.

10. After the measurement is completed, turn off the power of the instrument and hang it on the wall