HZD-B-5X，HZD-B-5I vibration probe

Characteristics:

★ Two wire loop, which can directly use DCS and PLC, is more convenient and economical to use and maintain than three wire transmitters

★ Fault tolerant technology, allowing for arbitrary polarity connection between two loop wires

★ Low power consumption, high stability measurement circuit, fully integrated process, ensuring high 4-20mA current output linearly corresponding to the vibrator/displacement

★ MEMS pressure point, integrated structure, sturdy and durable

★ High temperature resistance, impact resistance, waterproof, explosion-proof, and resistant to harsh environments

★ Multiple installation and connection types, multiple vibration range, can meet the application requirements of various occasions.

HZD-B-5X, HZD-B-5I vibration probe

Scope of application

Blowers, centrifuges, compressors, steam turbines, generators, motors, fans, large pumps, turbochargers

technical indicators

Power supply: 22V~28VDC, with fault tolerance protection, positive and negative polarity can be connected freely.

Vibration range: Multiple vibration types and ranges to choose from

Frequency response: Standard 5-2000Hz, -3dB with multiple options for frequency compensation and filtering

Sensitive direction: ≤ 3%

Shell material: stainless steel shell, sealed and filled with epoxy resin inside

Electrical isolation: 500Vrms circuit and housing isolation

Output connection: There are three types: 1. Terminal output with junction box 2. Connector output 3. Cable direct output

Output signal: There are two vibration current signals, one with two wires, two with four wires, and one buffer signal with two wires

Buffer output: Sensor acceleration dynamic signal buffer output, used for waveform acquisition and vibration analysis. Sensitivity of 100 mV/g, ± 3%. Output resistance: 100 ohms.

Current output: 4-20mAdc current proportional to the peak/effective value of speed or peak/peak displacement. Load capacity ≮ 500 ohms

Impact limit: 1000g

Environmental protection: Protection level is IP67

Temperature -40~100 ℃

Humidity 100%, short-term water immersion resistance (1m)

Explosion proof approval: Intrinsic safety type, certified by national explosion-proof personnel, explosion-proof level Exvd Ⅱ BT4 (requires installation of a certified Zener safety book)

Ordering Guide:

Selection code: HZD-B-5I

Range A □□:

01——0～100μm； 02*——0～200μm ； 03-0-500 μ m (vibration displacement)

04——0～10.0mm/S； 05*——0～20.0mm/S； 06-0-50.0mm/s (vibration intensity)

Unless there are special circumstances, the manufacturer will produce according to item *; If you have any special requirements, please consult with our company