Fully automatic ABB frequency converter

Tangshan frequency converter, fully automatic ABB frequency converter, as a high-quality motor frequency conversion speed control equipment, is an outstanding low-voltage AC transmission product. Applied in the industrial field, it is particularly suitable for fan and water pump transmission. Typical applications include constant pressure water supply, cooling fans, subway and tunnel ventilation fans, and so on.

Tangshan frequency converter, fully automatic ABB frequency converter introduction:

As a high-quality motor variable frequency speed control device, an outstanding low-voltage AC drive product. Applied in the industrial field, it is particularly suitable for fan and water pump transmission. Typical applications include constant pressure water supply, cooling fans, subway and tunnel ventilation fans, and so on.

Main performance:

*Matching fan and water pump:

·Enhanced PFC application: Up to 7 (1+6) pumps can be controlled; Can switch to more pumps

·SPFC: Loop soft start function; Each pump can be adjusted sequentially

·Multi point U/F curve: 5-point U/F curve can be freely defined; Flexible and widely applicable

·Beyond mode: applied to the fire mode of tunnel fans; Applied in emergency situations

·PID controller: Two independent built-in PID controllers: PID1 and PID2, PID1 can set two sets of parameters; PID2 can control an independent external valve.

ABBACS510 is more economical:

·Intuitive characteristics: noise reduction, increasing switch frequency when transmission temperature decreases, controllable cooling fan, only starts when needed; Randomly distributed switching frequency can reduce noise, greatly improving motor noise, reducing transmission noise, and enhancing efficiency

·Magnetic flux optimization: Automatically reduce motor magnetic flux when load decreases; Greatly reduce energy consumption and noise

·Connectivity: Simple installation, can be installed side by side, easy to connect cables, and conveniently connected to fieldbus systems through various I/O connections and plug and play options; Reduce installation time, save installation space, and make reliable cable connections more environmentally friendly:

·EMC: RFI filters suitable for * and second environments are standard; No need for additional external filters or reactors: Variable inductance reactors: match the inductance according to different loads, thus suppressing and reducing harmonics; Reduce total harmonics

ABBACS510 Other:

·Advanced control panel: 2 function keys, functions change with different states, built-in help key, modified parameter list; Easy to configure and debug, fast startup, quick entry into parameters

·Fieldbus: Built in RS485 interface, using Modbus protocol, with plug-in fieldbus module as an optional component; Reduced costs.

Precautions for fully automatic ABB frequency converter:

1. The ambient temperature has a significant impact on the service life of the frequency converter, so attention should be paid to the surrounding ambient temperature and the heat dissipation of the frequency converter.

2. The voltage at both ends of the electrolytic capacitor should not exceed the allowable operating voltage. Due to the positive and negative polarity of the electrolytic capacitor, it cannot be reversed when used in a circuit. In the power circuit, when a positive voltage is output, the positive terminal of the electrolytic capacitor is connected to the output terminal of the power supply, and the negative terminal is grounded. When a negative voltage is output, the negative terminal is connected to the output terminal, and the positive terminal is grounded.

3. If the concentration of corrosive gases is high in the usage environment, it will not only corrode the leads of electronic components, printed circuit boards, etc., but also accelerate the aging of plastic components and reduce insulation performance. In this case, the control box should be made into a closed structure and ventilated.

4. Electrolytic capacitors should not be placed near high-power heating elements in the circuit to avoid drying the electrolyte due to heating. For filtering positive and negative polarity signals, two electrolytic capacitors can be used in series as non-polar capacitors.

5. The control cabinet of the frequency converter should not be subjected to vibration and impact. If vibration occurs, it will cause poor electrical contact. Therefore, we need to improve the mechanical strength of the control cabinet, stay away from vibration and impact sources, and use anti-seismic rubber pads to fix components such as electromagnetic switches outside and inside the control cabinet that generate vibration.

6. When used in places with high dust, it is necessary to pay attention to overall sealing, design air inlet and outlet for ventilation, and the top of the control cabinet should have a protective net and a protective top cover for air outlet. The bottom of the control cabinet should have a bottom plate and air inlet, inlet holes, and install dust-proof nets.

7. Good grounding should be established, and the grounding wires of strong current control systems such as motors should be reliably grounded through busbars. The control system should be grounded independently as much as possible, and the shielding layer should be connected to the control ground of the control system to effectively suppress the conduction interference of the frequency converter on the power grid. Input AC and DC reactors should be installed.