-
E-mail
2458253722@qq.com
-
Phone
13790142908
-
Address
Room 102, Building 1, No. 101 Zhongxin Road, Changping Town, Dongguan City, Guangdong Province
Product Categories
- Tower type UV aging box
- IP9K Waterproof Test Chamber
- Composite salt spray testing machine
- Temperature and humidity FPC bending test chamber
- Electromagnetic vibration table
- Small constant temperature and humidity test chamber
- high-temperature oven
- Three box thermal shock test chamber
- Equipped with temperature and humidity function
- High, low temperature, and low pressure test chamber
- Fast temperature change test chamber
- Two box thermal shock test chamber
Guangdong Haotian Testing Instrument Co., Ltd
Cold and Moisture Resistant Bending Tester Graphene Thermal Conductive Film Testing
NegotiableUpdate on 01/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Cold and Moisture Resistant Bending Tester Graphene Thermal Conductive Film Testing $r $n This cold and moisture resistant bending tester is specially designed for testing graphene thermal conductive films. It can simulate a temperature range of -40 ℃ to+150 ℃ and a humidity range of 10% to 95%, accurately reproducing diverse environments. The bending testing device of the equipment can accurately control the angle and is equipped with high-precision force sensors to monitor the bending force in real time.
Product Details
Cold and Moisture Resistant Bending Tester Graphene Thermal Conductive Film Testing
When testing graphene thermal conductive films, it is possible to detect their bending toughness at low temperatures and evaluate their resistance to deformation in humid and hot environments. Its precise environmental simulation and testing capabilities provide reliable data for the performance evaluation of graphene thermal conductive films, assisting in the development and quality control of related products.
Main technical indicators:
3.1 Working power supply: AC220V/50Hz.
3.2 Power: 95W.
3.3 Test rate: adjustable from 10 to 60 times per minute.
3.4 Bending angles: 30 °, 45 °, 60 °, 90 °, 120 °, 150 °, 180 ° adjustable (0~180 ° adjustable)
3.5 Test Station: Conduct 6 plug lead tests simultaneously each time.
3.6 Bending times: 0-999999 can be preset.
3.7 Weight of weights: 6 pieces each of 50g, 100g, 200g, 300g, and 500g.
3.8 Automatic counters: 6 (LCD), counting separately
3.9 Volume: 85 × 60 × 75cm.
Product Details
The FPC bending resistance tester is mainly used for bending testing FPC circuit boards (commonly known as software circuit boards); Like a mobile phone, PDA, Test for flexural resistance and flexural life of electronic product soft boards such as car mounted FPC and computer FPC.
FPC bending resistance testing machine with Panasonic servo motor action control, accurate bending positioning, low noise, and can be used for a long time;
Adopting a power rectification circuit to enhance the long-term usability and anti-interference ability of the motor and executive components;
Using Korean AUTONIS photoelectric switch for load sensing, pulse frequency, durable use;
Using LCD display controller as program input, PLC control, and stepper motor drive;
The parameter settings include: bending angle, speed, number of tests, and motor return to origin, etc; Automatic counting, when the sample is bent until it breaks and cannot be powered on, and can automatically stop the operation.
Cold and Moisture Resistant Bending Tester Graphene Thermal Conductive Film Testing
Design 5 workstations for simultaneous testing work.
The swing head can be replaced with two types of measuring heads; R0.38、R0.5、R1.0, The lower fixture table can be locked or used as a weight to slide up and down when replacing the fixture as a whole;
Touch screen operation control test, test angle setting range -180~+180 degrees freely set, speed adjustable from 10-80 RPM, with power-off memory function;
FPC circuit board 210L high and low temperature bending testing machine Dongguan Haotian spot supply SMD-210PF-FPC
Test standard: This machine is mainly designed for FPC ribbon cables to undergo repeated bending tests under high temperature and high humidity double 85 and low temperature conditions. It performs back and forth bending tests at a certain speed, stroke, (angle), and counting. This machine complies with GB/T 2423.1-2016 Test A: Low temperature test method GB/T 2423.2-2016 Test B: High temperature test method GJB 150.3-2016 IEC68-2-1 Test A: Cold GB 11158 "Technical conditions for high temperature test chambers" GB/T10586-89 Wet heat test chamber conditions.
Similar Product Recommend
