ZOA-P1000 series zirconia flue gas analyzer

ZOA series intelligent zirconia oxygen analyzer

1、 Product Overview

The ZOA series intelligent zirconia oxygen analyzer is an online monitoring device designed specifically for industrial process gas detection. It adopts advanced zirconia sensing technology and can accurately measure the oxygen content of flue gas within the range of 0-25%. This series of products provides key data support for optimizing combustion efficiency and reducing energy consumption for enterprises through real-time oxygen concentration monitoring, and is widely used in various industrial combustion scenarios.

2、 Core technical characteristics

1. Measurement performance

-Accuracy level: ± 0.5% FS

-Response time: T90 ≤ 5s

-Temperature adaptation: Standard type 0-700 ℃/High temperature type customized

-Pressure range: ± 20kPa

2. Structural design

-Split type flange installation structure

-316L stainless steel protective sleeve

-IP65 protection level (probe)

-Anti corrosion coating is optional

3. System configuration

-LCD display interface

-4-20mA+RS485 dual output

-220VAC wide voltage power supply

-Explosion proof type optional (YB-88SFJ)

3、 Product Model Matrix

(Classified by application scenario)

|Model series | Applicable environment | Core features|

|ZOA-P1000 Series | Conventional Industrial Boiler | Standard Configuration/Economy Type|

|ZOA-P180 | Positive Pressure Combustion System | Enhanced Sealing Structure|

|HW-010/BWOA series | Garbage incineration/hazardous waste treatment | Double layer anti-corrosion/steam protection

|YB-88SFJ | Petrochemical/Chemical Plant | Explosion proof Certification/Intrinsic Safety Design|

|ZOA-2000 | Centralized monitoring system | Panel mounted secondary instrument|

4、 System selection specifications

1. Confirmation of working condition parameters

-Smoke temperature: Confirm the temperature range of the measurement point (normal/high temperature)

-Medium composition: Fuel type (coal/gas/biomass, etc.)

-Pressure characteristics: positive/negative pressure values and fluctuation range

-Corrosion factors: Content of corrosive gases such as H2S/Cl -/SOx

2. Install parameter matching

-Flange specifications: DN25-DN150 optional (supporting non-standard customization)

-Insertion depth: Choose according to the principle of 2/3 of the flue size (300-1500mm)

-Probe direction: vertical/horizontal installation with adaptive design

3. Function configuration selection

-Display Unit: Wall mounted/Vertical/Disk mounted

-Signal output: 4-20mA/Modbus RTU/HART protocol

-Extended functions: data recording/alarm contacts/wireless transmission

5、 Industry application solutions

1. Power industry

-Coal fired power plants: It is recommended to use ZOA-3A+anti-wear kit

-Gas Turbine: Recommended HW-010 Fast Response Probe

2. Environmental engineering

-Garbage power plant: equipped with BWOA-P1000 anti-corrosion probe as standard

-Hazardous waste treatment: dual probe redundant configuration scheme

3. Process industry

-Petrochemical Heating Furnace: YB-88SFJ Explosion proof System

-Glass Kiln: High Temperature ZO-7000 Series

6、 Technical Service System

Provide full cycle services from selection consultation, installation guidance to regular calibration, equipped with a professional debugging team, and promise:

-72 hour emergency response

-3-year warranty for core components

-Annual System Health Check

-Online remote diagnostic support