Water treatment aeration blower belt type aeration high-pressure air pump

NegotiableUpdate on 03/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The use environment of the belt type aeration high-pressure air pump for water treatment aeration blower should be kept clean regularly, the surface of the fan should be kept clean, there should be no debris at the inlet and outlet, and dust and other debris in the fan and pipeline should be removed regularly.

Product Details

Water treatment aeration blower Belt type aeration high-pressure air pump

Work performance:
1. It has dual functions of blowing and suction, and can be used for both suction and blowing;
2. Running with little or no oil, the output air is clean;

3. Compared to other fans, its pressure is much higher, often more than ten times that of ordinary fans;
4. Our explosion-proof blower is die cast as a whole and uses shockproof mounting feet, so its requirements for installation foundation are also very low. It can even operate normally without fixing the feet, which is very convenient and saves installation costs and installation cycles;
5. Compared to similar fans, its operating noise is lower, just like the high-pressure fan of the blower push out type:
6. Maintenance free use; Its consumable part is only one bearing, which basically does not require maintenance within the warranty period;
7. The mechanical wear of a vortex turbine is very small because there are no other mechanical contact parts besides the bearings, so the service life is naturally very long. As long as it is under normal operating conditions, 3-5 years is no problem;
8. The casing is made of all aluminum casting and equipped with a professional explosion-proof motor. The installation of the fan is simple and easy to use!

Water treatment aeration blower Belt type aeration high-pressure air pump

Production reasons

explosiveMany production sites produce certain flammable substances. About two-thirds of the underground coal mines contain explosive substances; In the chemical industry, over 80% of production workshop areas contain explosive substances. Oxygen: Oxygen in the air is ubiquitous. Ignition source: Electrical instruments are widely used in the production process, and various frictional sparks, mechanical wear sparks, electrostatic sparks, high temperatures, etc. are inevitable, especially when instruments and electrical components fail. Objectively, many industrial sites meet explosive conditions. When the concentration of explosive substances mixed with oxygen is within the explosive limit range, if there is an explosion source, an explosion will occur. Therefore, it is necessary to adopt explosion-proof measures