Stainless steel circulating reaction magnetic pump

NegotiableUpdate on 02/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The stainless steel circulation reaction magnetic pump uses a magnetic coupling to transmit the power of the motor to the impeller, thereby achieving the operation of the pump. The magnetic coupler consists of two magnets, the inner magnet is fixed on the motor shaft and the outer magnet is fixed on the pump shaft. The two magnets interact with each other through magnetic lines, transmitting the power of the motor to the pump shaft and driving the impeller to rotate. Due to the lack of mechanical contact between the inner and outer magnets, there is no leakage problem, which can effectively avoid environmental pollution and harm to the human body.

Product Details

Stainless steel circulating reaction magnetic pumpCharacteristics and principles:

1. Material:

Divided into acid and alkali resistant PP engineering plastics, PVDF fluoroplastics, stainless steel 304, stainless steel 316 materials, etc., the pump body is integrally formed, with good corrosion resistance, high temperature resistance, and no cracking.

2. Characteristics:

The impeller is integrated with the inner magnet and adopts a non mechanical seal design. The torque is transmitted through the cooperation between the driving magnets, which does not cause leakage of chemical liquids and does not cause wear and aging of the mechanical seal.

3. Working principle:

The outer magnetic steel is driven to rotate by the motor, and the inner magnetic steel and impeller are synchronously rotated through the isolation sleeve, so that the liquid is enclosed in the stationary isolation sleeve, achieving the effect of leak free liquid transportation. Therefore, the two important driving magnets inside the magnetic pump are the inner and outer, and the magnetic strength of the driving magnet determines the working efficiency of the magnetic pump.

Stainless steel circulating reaction magnetic pumpPrecautions for use

1. Before use, check whether the pump body, pump cover, impeller, bearings and other components are intact and undamaged. If there is any damage, they should be replaced in a timely manner.

2. Attention should be paid to the inlet and outlet directions of the pump during installation to avoid damage to the pump caused by reverse installation.

3. During use, attention should be paid to the operation of the pump. If any abnormalities are found, the pump should be stopped for inspection in a timely manner.

4. Special tools should be used during cleaning and maintenance to avoid scratching the pump body and impeller with hard objects.

5. When the pump is not in use for a long time, the medium inside should be emptied to prevent residual medium from causing corrosion and damage to the pump.

6. During transportation and storage, attention should be paid to avoiding collisions and drops to prevent damage to the pump.

7. During use, attention should be paid to keeping the pump clean and dry to avoid corrosion and rust.

8. When replacing seals, appropriate seals should be selected and installed correctly according to the instructions to avoid leakage and damage to the pump body.