Self cleaning filter dedicated controller T1&ACDP

NegotiableUpdate on 08/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The controller features an lT1AC designed specifically for self-cleaning mesh filters. Can receive differential pressure switch signal T1-4. The reset button RESET can reset the controller and initiate a new backwash cycle. Equipped with LED indicator lights, it can display the operation status of the filter. L can control up to 4 self-cleaning filters simultaneously. Power supply: 220VAC

Product Details

Controller features

lT1AC is designed specifically for self-cleaning mesh filters.

lCan receive differential pressure switch signals(T1-4 & DP ACType comes with a built-in analog differential pressure gauge).

lRESETRESETThe controller can be reset and a new backwash cycle can be initiated.

lhaveLEDIndicator light, which can display the operation status of the filter.

lMaximum simultaneous control4Self cleaning and filtering equipment.

lPower Supply:220VAC.

lexistDPThe differential pressure working mode will automatically detect frequent backwash faults, and when backwashing continuously7Afterwards, the controller sends out an alarm signal.

lProtection level:IP65

Parameter settings

Through the internal control of the controllerDIPJumper dip switch is used to set working parameters. Open the top cover of the control box, there is aS1/S2/S3Dial switch. Flipping the numbers above, the top is1Below is0Different setting parameters can be obtained. The corresponding codes are shown in the table below.

S1——FLUSHING TIME PER STATION:Backwash time

S2——INTERVAL BETEEN CYLES:Backwash cycle (i.e. interval between two backwashs)

S3——SET POINT OF THE DP SENSORBackwash differential pressure setting with built-in electronic differential pressure gauge

DP only: OnlyDPDifferential pressure signal initiates backwashing.