JTG3410 new standard asphalt rotary film oven 85 instrument

JTG3410 new standard asphalt rotary film oven 85 instrument

This product is categorized by countryJTG3410-2025 standard, and designed and manufactured according to the standards for rotary film ovens in the Japanese IIS standard. This instrument is suitable for measuring the performance changes of semi-solid asphalt under the action of heating and air,

This test method is closer to the actual situation of heating and mixing asphalt during use. The aging performance of asphalt can be assessed in a short period of time. It is suitable for asphalt mixing plants, highway and bridge engineering units, and relevant scientific research and quality inspection departments

Special equipment for asphalt aging performance.

JTG3410 new standard asphalt rotary film oven 85 instrument

Product Composition

The box is composed of three layers: inner, middle, and outer. The inner liner is made of stainless steel material, and the outer and middle layers are formed by bending hot plates. There is silicon cotton insulation in the middle. The studio is equipped with lighting fixtures, ventilators, turntable heaters, etc.

Precautions

1. Designed and manufactured for continuous use, the heater and electrical switches should be inspected once a month for any damage. 2. Do not turn on the lighting in the workspace at will, and do not keep it on for too long, which may lead to

Burn it.

Product Structure (Type 82)

1. The interior is a fully stainless steel studio with double doors and a glass window in the middle. Equipped with lighting indoors, the reading of the indoor thermometer can be easily seen from the outside during the measurement.

2. The heating device is installed at the bottom of the working area.

3. There is a turntable in the middle of the studio that can hold four asphalt sample dishes, which is driven by a motor. Rotate at a speed of 5.5 revolutions per minute.

4. The temperature control adopts intelligent instruments to ensure compliance with the 163C test regulations

Within 0.5 ° C.

Product Parameters (Type 82)

1. Rated power: 3kw;

2. Voltage: 220V;

3. Frequency: 50Hz;

4. Studio temperature: 163C0.5C;

5. Self control sensitivity: ± 0.5C;

6. Test sample turntable speed: 5.5r/min;