HTB high flow medium pressure blower

NegotiableUpdate on 02/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The HTB high flow medium pressure blower $r $n forms a series of spiral movements. The air between the impeller blades accelerates in a spiral shape and squeezes the gas outside the pump body into the side groove (sucked in through the suction port). When it enters the side channel, the gas is compressed and returns to the accelerated rotation between the impeller blades. When air passes through the impeller and side groove along a spiral trajectory, each impeller blade increases the degree of compression and acceleration. As rotation progresses, the kinetic energy of the gas increases, resulting in an increase in gas pressure passing through the side channel. When the air reaches the connection point between the side groove and the discharge flange (the side channel narrows at the outlet)

Product Details

HTB high flow medium pressure blower
HTB大流量中压鼓风机

HTB大流量中压鼓风机

HTB high flow medium pressure blowerSelection:

The fan is a medium pressure fan, also known as a through type blower, not a high-pressure fan. Remember this.

After knowing the suction volume and pressure, you can make a selection based on the performance table
The standard voltage is 3-phase 380 VOLTS. If different voltages are required, our company can also provide them

A、 The selection of fan pressure and air volume, such as how many cubic meters per minute and how many pascals of pressure are required.

Explosion proof fans have three phases, such as FB-3. When selecting, it is important to inform the salesperson to avoid making the wrong choice and causing inconvenience.

B、 If you know the power of the fan, it's good. If you don't know, you can choose based on the air volume and ask the salesperson to recommend it.

Transparent blower

Widely used in printed circuit board (PCB) equipment, cleaning equipment, canned beverage equipment, plastic peripheral equipment, non drying adhesive trademark printing equipment, woodworking machinery, kiln mining, combustion machines, dust collectors, incinerators, powder three-dimensional conveying, drying machines, glass industry, ice making industry, mechanical cooling, general air supply and other industries. Due to the stable performance, safe and reliable use, efficient and fast service of the Toupu blower product, it has been widely praised by customers.

Precautions for use:
Overload phenomenon occurs when fully closed (RB series). When fully open, overload phenomenon may occur (CX, TB, HTB, CS, PF, MS series). At this time, use an ammeter to confirm the current size and adjust the buffer. It is usually used within the fixed current range.
Repeatedly opening and closing the switch within one minute can cause the motor to overheat and should be avoided.
CX transparent fan equipped with frequency converter control - When using the frequency converter, the power waveform is distorted, the motor sound is loud, and the vibration is also significant. If using a frequency converter for operation and the temperature rises or there is significant vibration, please stop running. Please use it under the following conditions.
The high-frequency value (number of rotations) must be within the specified frequency range indicated on the label and within the fixed current range. Small cycle wave number (rotation number) - above 30 Hertz (Hz) and within the freezing current. Single phase motors cannot operate as frequency converters.