Cable tray impact tester GB/T23639 Impact strength test

1、 Product description:

Cable tray impact tester GB/T23639 Impact strength testThe device complies with the requirements of GB/T23639, JB/T10216-2013, and GB/T21762-2008 for impact testing equipment for steel cable trays, fiberglass cable trays, and aluminum alloy cable trays. It is suitable for mechanical impact strength testing equipment and can perform impact testing on cable trays of different sizes. The overall height can be adjusted. This device has the advantages of simple operation, convenient use, and quick installation.

2、 Composition of mechanical collision tester:

1. Rack: The rack is welded together with profiles and steel plates to ensure the required rigidity of the standard rack

2. Hammer head,

3. Hammer head lifting mechanism

4. Composed of hammer head limit and release mechanism (impact height), etc

3、 Technical parameters:

1. Swing rod: length 1000mm, equivalent mass to the hammer head

2. Hammer head size: ¢ 80mm * 137mm, impact head R50

3. Equivalent mass: 10J

4. Equivalent weight: 5KG

5. Drop height: 200mm

6. Dimensions: Length 680mm * 620mm * 2040mm (length * width * height)

4、 Usage:

1. Place a thick wooden board on the plane of the wall and attach three 250mm long cable trays onto the board. (Stable clamping)

2. Impact location: Three specimens are subjected to impact tests on the bottom and two sides respectively, with the impact locations being the middle of the bottom and two sides (the layout of the impact specimens is shown below)

1、 Product description:

Cable tray impact tester GB/T23639 Impact strength testThe device complies with the requirements of GB/T23639, JB/T10216-2013, and GB/T21762-2008 for impact testing equipment for steel cable trays, fiberglass cable trays, and aluminum alloy cable trays. It is suitable for mechanical impact strength testing equipment and can perform impact testing on cable trays of different sizes. The overall height can be adjusted. This device has the advantages of simple operation, convenient use, and quick installation.

2、 Composition of mechanical collision tester:

1. Rack: The rack is welded together with profiles and steel plates to ensure the required rigidity of the standard rack

2. Hammer head,

3. Hammer head lifting mechanism

4. Composed of hammer head limit and release mechanism (impact height), etc

3、 Technical parameters:

1. Swing rod: length 1000mm, equivalent mass to the hammer head

2. Impact hammer head size: ￠ 80mm * 137mm, impact head R50

3. Equivalent mass: 10J

4. Equivalent weight: 5KG

5. Drop height: 200mm

6. Dimensions: Length 680mm * 620mm * 2040mm (length * width * height)