Burkert Industrial Integrated Conductivity Meter

Burkert Industrial Integrated Conductivity MeterUsage and maintenance suggestions

1. Correct installation: Ensure that the Burkert conductivity meter is installed correctly to avoid measurement errors caused by improper installation.

2. Regular calibration: Regularly calibrate the instrument to ensure the accuracy of measurement results.

3. Maintain cleanliness: Regularly clean the electrode and instrument surface to avoid dirt and impurities affecting measurement accuracy.

4. Pay attention to temperature effects: As temperature can affect the conductivity of the solution, temperature compensation and control should be taken into account during use.

5. Follow the operating instructions: During use, it is necessary to strictly follow the operating instructions and safety regulations to ensure correct and error free operation.

Burkert Industrial Integrated Conductivity MeterKey points for installation and debugging

1. Installation location

• Avoid installation in blind spots or turbulent areas to prevent measurement errors caused by uneven media.

• Immersion electrodes should be installed vertically to ensure that there are no bubbles adhering to the electrode surface.

2. electrical connection

• Use shielded cables and single ended grounding to reduce electromagnetic interference.

• When the simulated signal transmission distance exceeds 100 meters, it is recommended to add a signal isolator.

3. Debugging steps

• calibrationUse standard solutions (such as KCl solution) for single point or two-point calibration, and some models support automatic calibration.

• Temperature compensation settingInput the actual temperature of the medium or enable the automatic temperature compensation function.

• Alarm threshold settingSet high and low limit alarm values according to process requirements.