Wire and cable pneumatic sample slicer

K-QP3wire and cablePneumatic sample slicer(Used for insulation, sheath, rubber, plastic, etc. of wires and cables)

1wire and cablePneumatic sample slicerProduct Introduction
It is to use the compressed air provided by the compressed air machine to enter the cylinder through the solenoid valve, drive the piston to drive it to the main shaft, so that the main shaft forms a downward movement, thereby forming an impact force, and use the cutting die to punch out the sample in the shape of the cutting die in the test piece.

Commonly used to cut insulation and sheath materials of rubber, plastic, wires and cables into standard shaped test pieces for testing purposes.

IIwire and cablePneumatic sample slicerMain technical parameters

1. Produce dumbbell test pieces with a thickness of 0.8-2.0mm

2. Impact stroke: 110mm

3. Gas source pressure: 0.8MPa;

4. Impact force: about 1.5T;

5. Sample table: 140mm × 300mm;

6. National standard dumbbell knife mold: 50mm × 8.5mm × 4mm, 75mm × 12.5mm × 4mm;
7. Dumbbell knife mold定制。

Features

1. easy to operateCompared to manual punching machines, pneumatic punching machines are more convenient to operate, as slicing can be achieved by controlling compressed air.
2. Fast sample preparation speedThe pneumatic punching machine utilizes the impact force generated by compressed air to quickly punch the specimen into the desired shape, greatly improving the sampling speed.
3. AdaptablePneumatic punching machine can select corresponding cutting blades according to different samples, suitable for punching various materials such as rubber, leather, film, paper, etc.
4. safe and reliableThe pneumatic punching machine uses compressed air as its power source, which is safer and more reliable compared to other power sources, and does not generate dangerous factors such as sparks during use.