Unidirectional flow indicator

NegotiableUpdate on 02/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Unidirectional flow signal is used to measure the flow state of liquids flowing through pipelines, such as water, oil, ethylene glycol, and other liquids that do not corrode copper. It is a new type of detection device widely used for water supply system interruption protection in hydropower stations. Adopting the Omron micro switch from Japan, the action is lightweight.

Product Details

Unidirectional flow indicatorIntroduction:

The SLX201-25/32/40/15 unidirectional mechanical flow indicator is used to measure the flow state of liquids flowing through pipelines, such as water, oil, ethylene glycol, and other liquids that do not corrode copper. It is a new type of detection device widely used for water supply system interruption protection in hydropower stations. Adopting the Omron micro switch from Japan, the action is lightweight.
2、 Model Description

3、 Technical parameters

1. Action pressure: 0.1-1.0 MPa;

2. High pressure: 1.5MPa;

3. Insulation resistance: Over 100M, DC500VM;

4. Contact lifespan: 1000K cycles;
5. Fluid temperature: Max 100 ℃, optional 150 ℃;

6. Interface thread material: stainless steel

7. Contact capacity: AC220V/3A; AC125V/5A； DC230V/0.15A； DC115V/0.3A；

4、 Selection parameters

Unidirectional flow indicatorAdjustment method

1. Open the upper cover of the liquid flow switch;

2. Adjust flow rate setting: Turn the adjustment screw clockwise;

3. Reduce flow setting: Turn the adjustment screw counterclockwise;

4. Before leaving the site, cover the liquid flow switch in its original position.

6、 Installation and wiring diagram

Note: It can be installed on horizontal or vertical pipelines, but there must be a straight line length of no less than 5 times the diameter on both sides of the switch.