Tousimis AUTOSAMDRI-931 touch screen fully automatic critical point dryer from the United States

AUTOSAMDRI-931 Non Cleanroom Series CPD

New generation touch screen fully automatic critical point dryer

Principle of critical point drying
The reason why it is called critical point drying (also known as supercritical drying) is because it has continuity of state, that is, the medium has no significant difference between liquid and gas, and the surface stress at the interface is reduced to zero. This phenomenon has a specific temperature and pressure, known as the critical point. The condition of zero surface stress can be used for drying biological samples or aqueous material samples, avoiding damage to the samples caused by surface stress.
We often need to perform dehydration treatment (gradient dehydration) when preparing biological samples or aqueous material samples under electron microscopy (scanning electron microscopy transmission electron microscopy), but the critical point of water is+374 ℃ and 3212 psi, which is inconvenient and prone to damage the sample. CO2 is usually a very convenient critical point drying medium, with a critical point at+31 ℃ and 1072 psi. However, it is not easy to mix with water, so a third medium must be used, usually ethanol or acetone as an intermediate liquid. In this way, when converting the transition liquid, i.e. CO2, from liquid to gas, there is no surface stress on the sample at the critical point.

Features and advantages

⊙ Touch screen control

Use factory settings or create custom recipes

Control of "slow charging" for extremely fragile samples

Internal particle filtration

⊙ Rapid cooling chamber (1.25 "working chamber takes about 1 minute)

Work chamber with illumination for precise observation of liquid level

Unique stirring method accelerates displacement while avoiding sample disturbance, making maintenance easier

❖ "Stasis software", which can completely replace ethanol with liquid CO2 during difficult sample processing, is suitable for gel and other complex samples

Equipped with a condenser to separate waste ethanol and carbon dioxide, eliminate electrostatic discharge and emission freezing, and eliminate noise during displacement emissions

⊙ Compact chassis

Main technical specifications

➢ Working chamber size: There are three chamber diameters to choose from: 1.25 ", 2.50", 3.40“

Pressure measurement range: 0-2000psi

Temperature measurement range:- 30°C to 60°C

➢ Control mode: Touch screen fully automatic program control

conventional arrangement

✓ Flexible high-pressure liquid CO2 supply hose, easy to install on site

✓ Liquid CO2 system transportation filtration

✓ Flexible exhaust pipe is easy to install

✓ Spare chamber O-ring, chamber light, and fuse

Note:Tousimis products from the United States have a history of nearly 50 years and have a very good reputation among Chinese customers. Qinsi Technology is the agent of its CPD supercritical dryer in China. TousimisCritical point dryerProducts are divided intoNon cleanroom versionandCleanroom versionTwo major categories,The former is commonly used for electron microscopy sample preparation, while the latter is mostly used for material research in ultra clean rooms;

Non cleanroom versionThere are a total of 7 types of CPD:

1）Samdri ®- PVT-3D Conventional Critical Point Drying Instrument

2）Samdri ®- 795 semi-automaticCritical point dryer

3）Autosamdri ®- 815 Series A Fully Automatic Critical Point Drying Instrument

4）Autosamdri ®- 815B Series AFully automatic critical point dryer

5）Autosamdri ®- nine hundred and thirty-one_1.25"touch screenfully automaticCritical point dryer

6）Autosamdri ®- 931_2.50"touch screenfully automaticCritical point dryer

7）Autosamdri ®- 931_3.40"touch screenfully automaticCritical point dryer

Cleanroom versionThere are a total of 9 types of CPD:

1）Autosamdri ®- 815 Series BFully automatic critical point dryerFor Die & 1”Wafers

2）Autosamdri ®- 815B Series BFully automatic critical point dryerFor 4”Wafers

3）Automegasamdri ®- 915B, Series BFully automatic critical point dryer for 6 "Wafers

4）Autosamdri ®- nine hundred and thirty-one_1.25"touch screenFully automatic multi-purposeCritical point dryer

5）Autosamdri ®- 931_2.50"touch screenFully automatic multi-purposeCritical point dryer

6）Autosamdri ®- 931_3.40"Multi purpose touch screenfully automaticCritical point dryer

7）Autosamdri ®- nine hundred and thirty-fourTouchscreen C seriesfully automaticCritical point dryer

8）Automegasamdri ®- nine hundred and thirty-sixTouchscreen C seriesfully automaticCritical point dryer

9）Automegasamdri ®-938Touchscreen C seriesfully automaticCritical point dryer

Tousimis supercritical dryer widely used in the United StatesIt is suitable for biological samples, gel and other fragile and complex samples with micro nano 3D structures, as well as MEMS MOF、 The critical point drying of material samples such as carbon nanotubes, graphene, and semiconductor wafers (with a maximum sample size of 8 inches, drying 5 pieces at a time). The principle of using CO2 critical point state without liquid phase surface tension to cause sample shrinkage deformation to obtain dry samples with real morphology is an effective method for drying and preparing biological samples such as cell tissues and semiconductor material samples containing water or other liquids; It has the characteristics of easy operation, precise control, and repeatable results. Among them, the classic SAMDRI ®- PVT-3D and award-winning Autosammdri ®- The 931 advanced touch screen fully automatic CPD and other models are particularly eye-catching. Customers can choose different models based on different applications.