TX-10 Transformer Core Grounding Current Tester

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The TX-10 transformer core grounding current tester is widely used for leakage current testing of iron cores and clamps in electrical equipment such as transformers and reactors in substations and power plants. Built in 1500mA rechargeable lithium battery with a standby time of 2-3 hours, convenient for on-site use. Adopting a 3.5-inch 320 240 true color LCD display screen, Windows menu operation prompts;

Product Details

　　TX-10 Transformer Core Grounding Current TesterProduct Introduction

Power transformer is the most important electrical equipment in the power system. Once a fault occurs during operation, it will cause serious consequences to the power system. The iron core of a normally operating transformer is grounded at a single point. If two or more points are grounded at the same time, a current loop will be formed between the iron core and the ground. The maximum current can reach several tens of amperes, which will cause local overheating or even burning of the iron core.TX-10 anti-interference transformer core grounding current testerWidely applicable for leakage current testing of iron cores and clamps in electrical equipment such as transformers and reactors in substations and power plants.

　　TX-10 Transformer Core Grounding Current TesterFeatures

1. Adopting clamp type current transformers for convenient on-site operation;

2. Anti interference capability * ensures accurate and reliable data;

3. Cooperate with high-speed microprocessors to display real-time measurement data and waveforms;

4. Using FFT transform, digital filtering and other algorithms for data processing;

5. Equipped with leakage current over limit alarm function, the alarm current can be set;

6. Adopting a 3.5-inch 320 × 240 true color LCD display screen and Windows menu operation prompts;

7. Built in large capacity non-volatile memory, capable of storing 200 sets of measurement data;

8. Built in high-precision real-time clock function: capable of date and time calibration;

9. Built in 1500mA rechargeable lithium battery with a standby time of 2-3 hours, convenient for on-site use.

technical indicators

1. Measurement range current: 0-10A

Frequency: 20-200Hz

2. Resolution 0.0001

3. Measurement accuracy ± (1% reading+2 words)

Friendly reminder: When purchasing instruments, choose products from direct manufacturers, as product quality and after-sales service are guaranteed!

Top Electric's main products:

Variable frequency series resonance test device, DC high voltage generator, SF6 micro water meter, SF6 gas leak detector, SF6 gas purity tester SF6 density relay calibrator, test transformer, ultra-low frequency high voltage generator, cable fault tester, DC resistance tester, transformer ratio group tester, microcomputer relay protection tester, high voltage switch mechanical characteristic tester, insulation oil dielectric strength tester (insulation oil withstand voltage tester), frequency conversion anti-interference dielectric loss tester, fully automatic capacitance and inductance tester, circuit resistance tester (contact resistance tester), high current generator (current converter), grounding resistance tester, insulation resistance tester (megohmmeter), zinc oxide lightning arrester tester, transformer characteristic tester, insulation boot and glove withstand voltage tester, power safety tool mechanical performance tester (electronic force tester), wireless high voltage nuclear tester Phase meter, transformer capacity characteristic tester, transformer on load tap changer tester Transformer winding deformation tester, transformer characteristic comprehensive testing platform, lightning counter calibrator, vacuum degree tester, vacuum oil filter, solar photovoltaic junction box tester, various oil analysis instruments, electric heating appliances, insulation products, sliding wire guide rail bridge, etc.