The manufacturer of TPHLC-B contact resistance tester is a digital switch detection instrument developed by Yangzhou Topu Electric Technology Co., Ltd. in accordance with relevant regulations. The instrument adopts a four terminal wiring method, effectively eliminating the influence of test line resistance on the test results. Micro ohm level contact resistance can be measured. Widely applicable for measuring contact resistance, circuit resistance, and contact resistance of cables, wires, and welds in various switches and electrical appliances.
Product Introduction
TPHLC-B Contact Resistance Tester ManufacturerIt is a digital switch detection instrument created by Topu Electric according to relevant regulations. This instrument adopts sine wave inverter and high-power constant current switching power supply technology, which can measure micro ohm level contact resistance. Widely applicable for measuring contact resistance, circuit resistance, and contact resistance of cables, wires, and welds in various switches and electrical appliances.
Features
1. The instrument has a high testing current and meets the standard requirements for testing contact resistance.
2TPHLC-B Contact Resistance Tester ManufacturerHigh output voltage, wide measurement range.
3. The test current comes from a high-precision high current constant current power supply, without the need for manual adjustment, and the test is fast and accurate.
4. The use of four terminal wiring method effectively eliminates the influence of test line resistance on the test results.
5. Fast testing speed, displaying data in about 10 seconds.
6. The instrument adopts a 128 × 64 dot matrix LCD screen, with all operations displayed in Chinese, making it convenient for customers to use.
7. The instrument has real-time printing function for test data.
8. Intelligent power management technology ensures that instruments always operate at low power levels, effectively reducing internal heat generation and saving energy.
technical indicators
1. Test current: 100A
2. Measurement range: 0-50m Ω
3. Resolution: 0.1 µ Ω
4. Measurement accuracy: ± (0.5% ± 2 words)
5. Power: 1000W
6. Working mode: Continuous measurement
7. Working power supply: AC 220V ± 10%, 50Hz
8. Usage conditions: Environmental temperature: 0-40 ℃
Relative humidity: less than or equal to 90%, no condensation
Note: 1. The series circuit resistance tester can be customized with specifications such as 100A, 200A, 300A, 600A, etc.
2. There are differences in the appearance of the circuit resistance testers for the above specifications. Please refer to the actual product for accuracy.
Friendly reminder: When purchasing instruments, choose products from direct manufacturers, as product quality and after-sales service are guaranteed!
Yangzhou Topu Electric's main equipment:
Complete set of equipment for frequency conversion series resonance test, DC high voltage generator, SF6 gas micro water tester, SF6 leak detector, SF6 purity analyzer, SF6 gas density relay calibrator SF6 Gas comprehensive tester, test transformer (power frequency withstand voltage test device), frequency conversion anti-interference high voltage dielectric loss tester, frequency doubling generator set, transformer DC resistance tester, transformer ratio tester, transformer capacity characteristic tester, transformer no-load characteristic tester, transformer on load tap changer tester, transformer winding deformation tester, transformer comprehensive test bench, transformer volt ampere characteristic tester, microcomputer relay protection tester, high voltage switch mechanical characteristic tester (circuit breaker characteristic tester), circuit resistance tester (contact resistance tester), high current generator (booster), grounding resistance tester, grounding conductivity tester, insulation resistance tester (megohmmeter), zinc oxide lightning arrester resistance tester Current tester, capacitance and inductance tester, battery constant current discharge tester Insulated boots and gloves withstand voltage test device, power safety tool detection equipment, mining cable fault tester, insulation oil dielectric strength tester (insulation oil withstand voltage tester), insulation oil chromatograph, various oil detection equipment, vacuum oil filter, solar photovoltaic junction box tester, electric heating appliances, insulation products, etc.