Stainless steel diaphragm pump

1YGB hydraulic diaphragm pumpCharacteristics, principles, and images:

YGB hydraulic diaphragm pump

YGB Hydraulic Diaphragm Pump Structure Diagram

The main working principle of YGB hydraulic diaphragm pump is that the electric power and reducer (1) make the plunger (2) make reciprocating motion, driving the hydraulic oil in the oil tank (3) to make synchronous reciprocating motion before and after the plunger, thereby causing the diaphragm (4) to produce reciprocating motion one before and one after. There are four one-way ball valves (6) installed in the two pump chambers (5) at the left and right ends of the YGB hydraulic diaphragm pump. The movement of the diaphragm causes a change in the volume of the working chamber, which forces the four one-way ball valves to alternately open and close, thereby continuously sucking and discharging the liquid. The upper part of the pump is equipped with an oil cylinder, which contains a fill valve and a safety valve. The function of the fill valve is to automatically replenish oil to the front and rear ends of the plunger. When the outlet of the pump is blocked or the pressure exceeds the rated value, the safety valve will automatically discharge the hydraulic oil, achieving the purpose of protecting the pump. Hydraulic diaphragm pump is a type of pump with relatively mature technology. In recent years, due to breakthroughs in diaphragm materials, more and more industrialized countries have adopted YGB hydraulic diaphragm pumps to replace some centrifugal pumps, screw pumps, gear pumps, etc., and applied them in industries such as electricity, petrochemicals, ceramics, metallurgy, etc.

IIYGB hydraulic diaphragm pumpProduct Features
YGB hydraulic diaphragm pump does not require water injection, with a self-priming capacity of over 5 meters and an outlet pressure of 20kgf/cm2.
With good performance, smuggling particles and mud below 10 millimeters can easily pass through.
Due to the separation of the conveying medium and transmission mechanical components by the YGB hydraulic diaphragm pump diaphragm, the medium will never leak outward. And the pump itself has no shaft seal, greatly extending its service life. According to different media, diaphragms are divided into chloroprene rubber, fluororubber, nitrile rubber, etc., which can fully meet the requirements of different users.
This pump has a suction viscosity of less than 15000 centipedes, a particle diameter of less than 10 millimeters, and a temperature resistance of up to 150 ° C

IIIYGB hydraulic diaphragm pumpperformance parameter