RZWW-03A speed/impactor monitoring device

Speed is an important operating monitoring parameter for steam turbine units. When the unit speed reaches 110% of the rated speed, the steam turbine should be shut down urgently. To achieve this goal, the unit security system is equipped with an emergency governor in the front bearing box of the steam turbine. The emergency governor impactor is "ejected" by the centrifugal force generated at 110% of the rated speed, which can cause the steam turbine to shut down urgently.

Before the new unit is put into operation or the unit is connected to the grid for each major overhaul, the speed of the impactor action must be measured. To prevent jamming of the impact nozzle, the manufacturer stipulates that the unit should undergo an impact nozzle fuel injection activity test after 2000 hours of continuous operation. However, the installation location of the emergency governor cannot observe the "striking" and "retracting" states of its impactor, nor can it determine the rotational speed when the impactor acts.

The turbine speed/impactor monitoring device adopts microcomputer intelligent technology to solve the problems of speed monitoring and impactor monitoring. It usually displays the turbine speed and captures and records the unit“high”Rotational speed: When the emergency governor collides with the "striking" or "retracting" sub, the internal memory function stores the rotational speed at the time of "striking" or "retracting" in the instrument panel. By pressing the "setting" button on the panel, it can be easily displayed in the display window“high”The rotational speed during "striking" and "retracting".