Explosion proof electronic vibration switch

NegotiableUpdate on 04/30

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The ZT-YBF60 electronic vibration switch (hereinafter referred to as the vibration switch) is a explosion-proof structure made in accordance with the provisions of GB3836.1-2010 "Electrical Equipment for Explosive Gas Environments Part 1 General Requirements" and GB3836.2-2010 "Electrical Equipment for Explosive Gas Environments Part 2 Explosion proof Type" d ". Its explosion-proof mark is Ex d Ⅱ CT6, and it is suitable for explosion hazardous Zone 1 and Zone 2 places where there are or may be Class IIA, IIB, IIC, T1~T6 combustible gases, vapors, and air mixed in the factory.

Product Details

ZT-YBF60Electronic vibration switch (hereinafter referred to as vibration switch) is based onGB3836.1-2010Electrical Equipment for Explosion proof Gas Environments 第1part General Requirements "GB3836.2-2010Electrical equipment for explosive gas environments 第2part Explosion proof type“d”》The explosion-proof structure is made according to the regulations, and its explosion-proof mark isEx dⅡCT6,Applicable to factories that exist or may exist IIA、ⅡB、ⅡCClass,T1~T6Explosion hazard caused by the mixture of flammable gases, vapors, and air1District2District venue.

Vibration monitoring is a means of early fault alarm for machines, as most auxiliary machine failures are reflected in the increase of vibration. The vibration switch can monitor abnormal vibrations of the machine and predict machine damage. It mainly monitors machine faults such as rotor imbalance, misalignment, bearing damage, and belt damage. This vibration switch can continuously monitor the vibration of the machine. If the vibration of the machine exceeds the allowable value, the vibration switch will provide an alarm or turn off the machine power, protecting the machine from damage. Suitable for various rotating machinery, such as motors, centrifuges, fans, water pumps, etc.