Special drag chain cable

NegotiableUpdate on 01/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Special drag chain cables have characteristics such as tear resistance, UV resistance, corrosion resistance, drag resistance, tension resistance, wear resistance, and low temperature resistance. They are suitable for situations such as reciprocating movement and contraction of cables in large mobile equipment drag chains.

Product Details

　　Introduction to special drag chain cables:

Low temperature resistance -60 ℃~+80 ℃, super aging resistance, tear resistance, UV resistance, corrosion resistance, drag resistance, tension resistance, abrasion resistance, low temperature resistance and other characteristics, suitable for large-scale mobile equipment drag chain cable reciprocating movement, movement and contraction and other occasions.

product structure

Core material: copper wire; Core count: 2-60; Sheath material: imported polyurethane mixture; Sheath: Better polyurethane color: black, gray. Nominal cross-section: 0.08-95 (mm2); Product certification: CCC; Flexible cables for connection and control are widely used in outdoor environments with harsh weather conditions.

Product Features:

Wear resistant, corrosion-resistant, UV resistant, low-temperature resistant (-60 ℃~135 ℃), acid alkali resistant, bending resistant and other cable structures:

Conductor: Multiple strands of fine twisted and precision twisted bundles of first grade oxygen free copper wire are used as the conductor, complying with DIN VDE 0295 level 6 insulation: better PUR mixture color: colored wire core or coding wire core ≥ 3 cores plus yellow green core wire shielding: tinned copper wire weaving, shielding density ≥ 80%

Sheath: Better Polyurethane Color: Black, Grey

Rated voltage: U0/U<0.5mm2 300/300 V ≥ 0.5mm2 300/500 V Test voltage: U 3000V in accordance with DIN VDE 0281 Part 2

Temperature range: ℃

Mobile installation: -45 ℃~+135 ℃

Fixed installation: -60 ℃~+135 ℃

　　Special drag chain cableInstallation precautions

1. The laying of drag chain cables cannot be twisted, that is, the cable cannot be untied from one end of the cable drum or cable reel. Instead, the drum or cable reel should be rotated first to unfold the cable, and if necessary, the cable can be unfolded or hung up. The cable used for this occasion can only be obtained directly from the cable reel.

2. Attention must be paid to the minimum bending radius of the cable, and the installation radius should not be less than 6 times the diameter of the cable.

3. The cables must be laid loosely side by side in the drag chain, separated as much as possible, separated by spacers or inserted into the separation holes of the bracket. The gap between the cables in the drag chain should be at least 10% of the cable diameter.

4. The cables in the drag chain must not come into contact with each other or get stuck together.

5. Both points of the cable must be fixed, or at least fixed at the moving end of the drag chain. The distance between the moving point of a general cable and the end of the drag chain should be 20-30 times the diameter of the cable.

6. Please ensure that the cable moves within the bending radius and cannot be forced to move. In this way, the cables can move relative to each other or to the guiding device. After a period of operation, it is best to check the position of the cable. This inspection must be conducted after the push-pull movement.

7. If the drag chain breaks, its cable also needs to be replaced, as damage caused by excessive stretching cannot be avoided.