Soow special cable

Soow special cableIntroduction:

It is a portable control cable that is very suitable for heavy industrial use. Common applications include remote control circuits for button stations, fire alarm control, temperature control systems, and motor lead wiring. The cable has an oil resistant sheath and insulation layer. It can also resist oil, solvents, water, ozone, aging, and wear. This portable power cord has a rated voltage of 600V and a temperature range of -50 ° C to 105 ° C. It also complies with UL Style 62.
SOOW Construction:
Conductor: Stranded copper, exposed or tinned
Insulation: EPDM
Sheath: Thermosetting CPE or Super Vu Tron
Delimiter: paper tape, easy to peel off
SOOW rating and recognition:
Rated voltage: 600V
Temperature range: -40 ° C to+90 ° C (-50 ° C to 105 ° C for tin plated copper conductors)
What is SOOW cable for UL 62 type?

In the most basic case,Soow cableIt may be the current type of portable power cord.
Just like using SJOOW cables, you only need to understand the meaning of each letter in the SOOW cable name to learn a lot about the function of SOOW cables:
S=Service
OO=Oil resistant insulation
W = 防潮和耐候

Made of multiple strands of soft Class copper conductors. According to the size of the cable, the number of internal conductors can range from 2 to 60. Placing wax paper filters between conductors and thin paper made partition cables between conductors and external coverings - called sheaths - adds additional insulation and makes it easier to remove sheaths for some reason to contact the internal conductors.
There is usually another type of insulation material inside the cable. Many times it is EPDM (ethylene propylene diene monomer) or EP (ethylene propylene diene monomer) rubber. These types of materials are part of the thermosetting insulation material group. Through thermosetting technology, the material is actually extruded onto the wires and then combined with them under heat and pressure. This means that even when placed in extremely hot or other conditions, the insulation material will not fade.

Soow special cableNotes:

1. When mining cables are placed parallel to thermal pipelines, they should be connected at a distance of 2m, and when interwoven, they should be connected at a distance of 0.5m.

2. When cables are parallel or interwoven with other pipelines, they must be connected at a distance of 0.5m.

3. When directly burying cables, the burial depth of 1-35kV cables should not be less than 0.7m.

4. When parallel cables of 10kV and below are installed, the clear distance between each other shall not be less than 0.1m, for 10-35kV, it shall not be less than 0.25m, and for interweaving, the distance shall not be less than 0.5m.

5. The minimum bending radius of cables shall not be less than 15D for multi-core cables and 20D for single core cables (D is the outer diameter of the cable).

6. Discussion on cables of 6kV and above.

7. The fundamental requirement for discussing cable terminations and centers is: a. Excellent connection of conductors; b. The insulation is reliable, and it is recommended to adopt radiation cross-linked heat shrinkable silicone rubber insulation material; c. Well sealed; d. Adequate machine strength to adapt to various operating conditions.

8. The cable end must be waterproof and resistant to corrosion from other corrosive materials to prevent breakdown caused by insulation aging caused by water trees.

9. The loading and unloading of cables must use cranes or forklifts to prevent flat transportation and placement. When placing large cables, a cable car must be used to avoid damage to the insulation layer due to external forces or manual dragging.

10. If the cable cannot be laid in real time for some reason, it should be stored in a dry place to prevent exposure to sunlight and water ingress at the cable end.