SIKO Magnetic Sensor MSK320 Series

The maximum resolution is 12.5 μ m • When combined with MR320 or MBR320 (250 needles), the maximum resolution is 0.006 ° • The repeatability accuracy is ± 0.04 millimeters • The repeatability accuracy is ± 1 incremental • It works in conjunction with magnetic ruler MB320/1, magnetic ring MRI01 or MR320, and magnetic ruler ring MBR320 • The value distance is ≤ 2 mm • When connected with MR320 or MBR320 (250 needles), it can achieve a maximum of 16000 pulses per revolution

The maximum resolution is 12.5 μ m

Together with MR320 or MBR320 (250 needles), the maximum resolution is 0.006 °

The repeatability accuracy is ± 0.04 millimeters

Repetitive accuracy ± 1 incremental formula

Work in conjunction with magnetic ruler MB320/1, magnetic ring MRI01 or MR320, and magnetic ruler ring MBR320

Value distance ≤ 2 mm

SIKO Magnetic Sensor MSK320 Series

SIKO Magnetic Sensor MSK320 Series

Brand:Elbow

Series:MSK320

Product Name: Magnetic Sensor

the number of pages:4page

A: Working voltage(Working Voltage)

4 : 24 V DC ±20%(with reverse polarity protection)

5: 5 V DC ±5%(Note: There may be a voltage drop as the cable length increases)

B: Shape structure(Housing Design)

A :Rectangular plastic shell(A-type structure)

ZM :Metal shell (die cast zinc), noneLEDstatus indicator light(ZM-type structure)

F :Cylindrical shell(F-type structure)(Note: This option is only available for output signals.)NIThe reference signal isOAnd the scaling ratio is8 When)

C: Connection method(Connection Type)

E1 :Open cable end(Open cable end)

E6X :Circular plug (without matching connector)(Circular plug, no mating connector)

E8X : D-SUB 9Pin plug (without matching connector)(D-SUB 9-pin plug, no mating connector)

D: Cable length(Cable Length)

The standard length is 0.5 . .. 2.0 mThe minimum increment is0.5 m.

For example:01.0 represent1.0 Meter cable.

Other lengths require consultation .

EOutput circuit(Output Circuit)

PP :push-pull(Push-Pull)(Note: Only applicable to operating voltage)24V DC）

LD : Line Driver (RS422)

TTL : TTLLevel (note: limited to in-phase output signals only, and cable length)≤ 5 m）

F: Output signal(Output Signal)

NI :Non inverted(Non-inverting)

I :Reverse phase(Inverting)(Note: Only inAType orZMType structure, and the reference signal isIorRWhen optional)

G: Reference signal(Reference Signal)

O :No reference signal(None)

I :Periodic index signal(Periodic index signal)(Note: Only applicable to)AType orZMType structure, index signal width approximately3.2mm）

R :Fixed reference point(Reference fixed)(Note: Only applicable to)AType orZMType structure, and the scaling ratio is not1 When optional)

FR :Flexible reference points(Flexible reference)(Note: Only inZMStructure, coupled with magnetic rulerMB320/1When optional)

H: Linear resolution/Radial scaling factor(Linear Resolution / Radial Scaling Factor)

The resolution listed here is (Linear) and corresponding scaling factor Choose according to your accuracy requirements:

0.0125/64:resolution12.5 μm (0.0125 mm), scaling factor64 (Highest resolution)

0.04/20:resolution0.04 mm, scaling factor20

0.05/16:resolution0.05 mm, scaling factor16

0.08/10:resolution0.08 mm, scaling factor10

0.1/8:resolution0.1 mm, scaling factor8

0.16/5:resolution0.16 mm, scaling factor5

0.2/4:resolution0.2 mm, scaling factor4

0.8/1:resolution0.8 mm, scaling factor1