SIKO Electronic Position Indicator AP05 Series

The position indicator AP05 intuitively guides users to correctly set up the machine during product replacement or size format changes. Optimized backlit display accurately indicates theoretical and actual values. The dual LED lights clearly indicate the direction that the operator needs to adjust. Therefore, using the position indicator AP05 can avoid machine errors and ensure the reliable process safety of flexible production machinery.

SIKO Electronic Position Indicator AP05 Series

The position indicator AP05 intuitively guides users to correctly set up the machine during product replacement or size format changes. Optimized backlit display accurately indicates theoretical and actual values. The dual LED lights clearly indicate the direction that the operator needs to adjust. Therefore, using the position indicator AP05 can avoid machine errors and ensure the reliable process safety of flexible production machinery.

• Electronic position display with bus interface or signal communication interface

• Dual row LCD display with backlight

• Display of theoretical and actual values for integrated calibration

• Guide users through LED status indicator lights

• Hollow shaft with 20mm diameter stainless steel clamp ring

• Improved impact resistance by protecting the glass through the monitor

• Integrated RS485 communication interface, CAN bus or IO Link system are optional

• Powerful sensor device using magnetic scanning

• Compatible with the expansion of position indicators AP04 and DA04

• Protection level IP53, optional IP65

• Industry 4.0 readiness

Brand:Elbow

Series:AP05

Product Name: Position Indicator

the number of pages:4

The analysis of each part is as follows:

Basic model(Main Type):

AP05:This is the basic serial number of the product, indicating an electronic position indicator with a bus interface.

interface type(Interface Type -the first one'□'):

IOL:Indicating equipmentIO-LinkInterface.

S3/09:Indicating equipmentRS485Interface.

CAN:Indicating equipmentCANopenInterface.

This location must select an interface type.

hollow shaft/diameter(Hollow Shaft/Diameter -the second'□'):

20:The standard hollow shaft inner diameter is20 mm.

This position is usually 20.

RH12, RH14, RH15, RH16

Other inquiries available

Intermediate board(Intermediate Plate - 'A - □'):

OZP：none，Indicates the absence of a middle plate.

ZP04:Indicating equipmentZP04Type intermediate plate(For specific installations, such as matchingDA04).

ZP09:Indicating equipmentZP09Type intermediate plate(Used for matchingDA09S).

Choose based on whether and which type of intermediate board is needed.

Protection level(Protection Class - 'B - □'):

IP53:The standard protection level is represented asIP53 (Dustproof and water-resistant).

IP65:Indicates that a higher level of protection can be selectedIP65 (Dustproof and water-resistant).

Choose based on the severity of the application environment.

connection method(Connection Type - 'C - □'):

none:Indicates no pre installed connectors or cables.

EX:Indicating industrial useM8plug(commonly used forIO-LinkandRS485interface).

E12X:expressM12Cable outlet end(commonly used forIO-Linkinterface).

E15X:expressM8Cable outlet end(commonly used forRS485/S3/09andCANinterface).

Choose based on actual wiring requirements and the selected interface type.

software compatibility(Software Compatibility - 'D - □'):

S：Standard software

SW04:Representing software andAP04-CANCompatible.

SW05:Representing software andAP04-SN5Compatible.

SW06:Representing software andAP04-SN3/4Compatible.