Manufacturer of spray dust reduction device

Manufacturer of spray dust reduction deviceDetailed introduction: The main functions of the spray device include dust reduction, humidification, cooling, deodorization and disinfection, etc. There are two commonly used products: high-pressure spray dust reduction device and dry mist dust suppression device. The working principle of high-pressure spray dust reduction equipment is to use the water pump in the host to pressurize clean water to above 0.4Mpa, and then spray it out through a special nozzle. The sprayed water mist collides with the dust in the air, causing the dust to fall to the ground, and the improvement effect on the environment is very significant. The high-pressure spray equipment is mainly composed of high-pressure pump, nozzle, water treatment device, etc. At present, the commonly used swirl nozzles in foreign countries have defects such as large mist particles, poor fogging performance, and easy water accumulation when spraying mist. Spray dust fall is mainly the collision capture and condensation sedimentation of fog droplets and dust particles. Through research and analysis, the factors that have a greater impact on the amount of dust deposition are mainly as follows: the relative speed of fog droplets and dust, the dust collection efficiency of isolated droplets, dust concentration, the area of the capture area, the water content of the space volume, the area of fog droplets, and the volume of fog droplets. It was found from the experiment that the smaller the droplet size, the higher the dust reduction efficiency, and the higher the water supply pressure, the higher the dust reduction efficiency.

The high-pressure spray dust suppression system can operate by itself during the entire operation process of the equipment, and the customer can adjust the spray concentration and particle size according to the requirements of the on-site link, and can also set the time freely, achieving the goal of intelligent new dust removal, which is very suitable for the unorganized emission control of dust in the iron and steel metallurgy industry. It is hoped that the high-pressure spray dust suppression system can provide the more significant dust suppression effect for the steel plant, cement plant and coal mine with less water consumption without increasing material humidity.

Compared to other dust reduction methods, high-pressure spraying uses water mist for dust reduction, which has many product advantages, such as:

1. The equipment procurement and operation costs are very low, with one device costing ten to twenty thousand yuan, which is much lower than the cost of bag dust removal. The equipment has low power, and a 5.5KW device can control thousands of square meters, with low water consumption, saving the enterprise a lot of costs.

2. The product is highly intelligent, and the control modes include time control, remote control, cyclic spray control, infrared control and other modes for customers to choose.

3. The dust reduction effect is good. The nozzle is installed on the top of the material shed, which can achieve a large area of water mist covering the blind spots. The water mist particles wrap the dust, which can quickly make the dust fall to the ground and prevent the dust from escaping and spreading.

4. The equipment has a long service life, and imported accessories are used for important product configurations, with a service life of up to 8-10 years.

Manufacturer of spray dust reduction deviceThe "Mist King" high-pressure spray dust suppression system is hung on the top of the workshop and sprayed directly onto the surface of the materials, which will neither wet the materials nor cause heat value loss. It can quickly deal with dust pollution from the source, and also create a clean and bright environment in the workshop, giving workers a safe and comfortable working environment. Since then, the use of dust reduction equipment not only ensures that the emissions in the production workshop meet national standards, but also warms the hearts of employees and makes them work harder for the enterprise.