Evaporative cooling energy-saving air conditioning manufacturer

Evaporative cooling energy-saving air conditioning manufacturerDetailed introduction: With the continuous rise of global temperatures, it is particularly important for factories and workshops to solve the temperature problem and create a good production environment with fresh ventilation and suitable temperature every summer. So how to solve the problems of poor ventilation and high temperature in the workshop through a wide variety of cooling and ventilation equipment on the market. Firstly, it is necessary to select suitable and cost-effective cooling and ventilation equipment in the market. Evaporative cooling energy-saving air conditioning has become one of the commonly used cooling equipment in industrial plants due to its advantages of energy saving, fast cooling, and good cooling effect.

The cooling principle of evaporative cooling energy-saving air conditioning is actually the same as traditional air conditioning, which uses refrigerant to cool down. Evaporative cooling mainly refers to the external unit using evaporative cooling to convert warm water into cold water, which is then transported to the internal unit. The cold water is used to cool the high-temperature heat exchange system. Traditional air conditioning uses fans to cool down. By using cold water cooling, the energy efficiency ratio is higher and the energy-saving effect is more obvious.

The evaporative cooling energy-saving air conditioner can reach a temperature of about 13-17 degrees Celsius at the air outlet after ten minutes of operation, which can quickly cool the workshop to 26 degrees Celsius. The equipment host contains an industrial grade scroll compressor, which uses 410 refrigerant for cooling. The internal and external units are connected by PVC water pipes, so installation and maintenance are relatively simple. There are many types of products from evaporative cooling energy-saving air conditioning manufacturers, including 5 horsepower, 8 horsepower, 10 horsepower, 12 horsepower and other models. In addition, there are various installation methods such as cabinet type, hanging type, and duct type, which are mainly selected according to the working conditions of the workshop. The internal unit of evaporative cooling energy-saving air conditioning adopts the same technology as household air conditioning, with a service life of 10-15 years, which can operate for a long time and has a low maintenance rate.

Evaporative cooling energy-saving air conditioning manufacturerReminder for installation precautions:

1. For suspended cabinet models, the installation of the internal unit should consider the convenience of subsequent maintenance

2. Whether the condensed water should be recycled to the cooling tower depends on the customer and on-site conditions.

3. The noise is loud, and shock absorption measures such as adding rubber blocks and suspension rods should be considered during installation

4. When opening holes in the wall, it is necessary to confirm whether there are pre embedded pipelines in the wall and whether the main structure can be opened. Especially for shear walls and load-bearing columns, it is necessary for the customer to sign and confirm before opening holes.

5. If the internal unit is suspended, the connection between the angle iron frame and the wall should ensure that it can withstand the weight of the internal unit.

6. Reduce the number of bends in the air supply duct exercise and minimize the resistance of the air outlet.

7. Ensure good grounding of the power wiring to avoid unexpected situations such as short circuits.