Italian ATOS solenoid valve DHE-0713P \ 24VDC

NegotiableUpdate on 02/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Italian ATOS solenoid valve DHE-0713P \\ \\ 24VDC $r $n can be matched with different circuits to achieve the expected control, and the accuracy and flexibility of the control can be guaranteed. There are many types of solenoid valves, and different solenoid valves function at different positions in the control system. A well-designed Atos solenoid valve coil with low power consumption is considered an energy-saving product; It can also automatically maintain the $r $n valve position by simply triggering an action, without consuming any electricity during normal operation.

Product Details

Italian ATOS solenoid valve DHE-0713P \ \ 24VDC

DHE directional valve

Direct, spool type, base plate, AC or DC solenoid, cURus marking. DIN, AMP, Deutsch or wire connectors

Wire type, two or three position direct operated valve, high-performance threaded solenoid valve, certified according to North American standards.

Introduction and Selection of ATOS Solenoid Valve DHE Series

Sliding valve type, two or three E-positions, direct acting, with North American certification standard cURus high-performance threaded electromagnet.

Electromagnetic components:

Wet threaded core tube, not suitable for DC and AC core tubes, with manual emergency button.

DC coils or AC coils are interchangeable and easy to replace without tools

The labeled coil protection level is IP67, and the optional coil protection level is IP67, with AMP Junior Timer plug or extended lead plug.

Equipped with a range of interchangeable valve cores with different functions.

The 3-cavity valve body shell is cast and formed, with a larger internal flow channel.

Installation interface: ISO 4401 standard, 06 diameter

Flow rate: 801/min

Encouragement: 350bar

The solenoid is composed of a wet threaded tube, different AC and DC power sources, and an integrated manual cover pin with interchangeable coils. It is specifically designed for AC or DC power sources and is easy to replace without tools. It can be protected by voltage standard coils, IP65 optional coils, and connected to IP67 AMP primary timers or wires. Wide range of interchangeable spools. The valve body is a 3-cavity type and is made of shell castings.

Installation surface: ISO 4401

Size 06

High flow rate: 80 l/min

High pressure: 350 bar

ATOS solenoid valve DKE-1713 DC20

ATOS solenoid valve DHI-0713P 23

ATOS solenoid valve DKE-1711 DC20

ATOS solenoid valve SDHI-0631/2 23 24VDC

ATOS solenoid valve SDHE-0713-X24DC

Italian ATOS solenoid valve DHE-0713P \ \ 24VDC