Insulation material high electric field dielectric, loss, leakage current testing

High electric field dielectric, loss, and leakage current testing system

----Realize the output and measurement of signals from low frequency to high frequency----

Insulation material high electric field dielectric, loss, leakage current testingsystemThis experimental system can achieve the output and measurement of signals from low frequency to high frequency. The system sends instructions from the industrial computer, and the microcontroller controls the FPGA to send out measurement waveforms. One signal from the FPGA controls signals of different frequency amplitudes, which are amplified by a high voltage amplifier and applied to the sample. The other signal is applied to a lock-in amplifier as a reference signal. High voltage signals of different frequency amplitudes are loaded onto the sample, and the measured signals from the sample are then transmitted back to the FPGA test board. The measured data is then transmitted back to the industrial computer for data processing by the microcontroller. It uses true AC DFR (dielectric frequency response) to maintain excellent accuracy and provide reliable data, enabling reliable test results in high interference environments. This software makes testing simple and fast, as it can measure the dielectric constant and dielectric loss factor of materials at different temperatures and frequencies. This system can perform dielectric response testing under any voltage excitation and customize the output of any voltage waveform excitation according to needs, meeting the testing requirements of different insulation materials under different conditions and aspects, and better adapting to user needs.

Main technical indicators
Test host
Dielectric spectrum testing frequency range:1 mHz ~ 10 kHz
portINPUTTheOUTPUTCollection, communication, and grounding
Range of output voltage amplitude:0 ~ 500 V
Voltage rise rate:150 V/μs
Output voltage DC bias:≤1 V
Internal capacitance of high-voltage power supply:300 pF
Effective measurement range of current:2×10^-13 ~ 2×10^-3A(Peak Communication)
Test insulation impedance range:5000~10^15Ω
Current measurement error:≤1%
Overcurrent protection activated: AC peak reached40mA，5ms
Correction: Allow on-site correction
PCRequirement: Operating System:WIN10/11Processor:I3Or higher

High voltage power amplifier
Output voltage range:0 ~ ±20 kV DCorACpeak
Output current range:0 ~ ±20 mA DCor1ms ±60 mA ACPeak value (does not need to exceed)20mA rms）
Input voltage range:0 ~ ±10 V DCorACpeak
Input impedance:25 kΩ, nominal value
DC voltage gain:2000 V / V
Big signal:2 kHZ(full scale)
Small signal:10 kHz

Environmental testing chamber (can be used for high-voltage dielectric and resistance testing)
Temperature:230℃
Temperature:-80℃(Liquid Nitrogen)
Measurement method: Three electrode method/Clamping of irregular parts
Refrigeration method: liquid nitrogen
Heating and cooling methods: programmable control

Powerful operating software
Software platform for testing systemHuaceproBased onlabviewSystem development that meets the testing requirements of functional materials, has strong stability and operational safety, and has the function of saving power-off data. Image data can also be saved and restored. Support international standards, compatibleXPThewin7Thewin10System.
01.Supports Chinese/English bilingual interface;
02.Real time browsing of system testing status without waiting;
03.User permissions can be set for easy management;
04.The software has a device fault alarm function;
05.Through the status diagram in the software, it is clear at a glance and the status is immediately explained to understand the testing status;
06.Custom report format, one click printing of test reports, and export capabilityEXCELThePDFFormat report.