Initial adhesion tester

the United StatesInitial adhesion tester

ChemInstrumentsof LT-1000 Loop Tack TesterIt is specifically designed for Fast and accurate measurement of adhesive tapeLoop TackThe instrument.Complies with the following specifications:

·PSTC16

·ASTM D6195 Test Method B

·FINAT FTM-9

·Accuracyload cellGlobal in scope ± 0.1 %

·Can automatically remember the latest information20Group test values. 120Vor240V

·Use10pound（4.5kilogram）ofload cell,Can measure a wide range of tape.

·MatchingLABThe software can draw distribution graphics.

·Rated voltage

Attention: Before plugging in, it is necessary to confirm that there is no condensed water vapor inside.

·ChemInstrumentsIt is alreadyISO17025Recognized instrument calibration unit, load cellThey will be verified before leaving the factory.

Size:

·High:16inch（41Centimeters)

·Width:12inch（31Centimeters)

·Deep:15inch（38centimeter）

·Heavy:37 pound（17Kilogram)

Purchase items:

1TheLABData collection system.

Recommend to buyEZ LabData collection system. Very convenient, other instruments of our company can also be used.

CheminstrumentsThe data collection system is a very convenient software for handling power testing. This system not only reads the force measured by the instrument and displays it numerically, but also stores it in the computer memory.

（1）Display the maximum, minimum, and average values for each set of tests.

（2）Zui Multi Storage20The group test numbers allow the operator to review the previously measured data.

（3）Data can be transmitted throughRS-232The device outputs to the computer.

（4）can choose use Grams, kilograms, pounds orNewtonTo display.

（5）Can record every second400Using point data for calculation is a very sophisticated testing instrument.

2TheEZ link,Coordinated routes.

3TheLTAtoolkitStandard steel plates, manual rollers, test piece cutters, etc.
After finally purchasing standard testing equipment, it is necessary to use standard products for testing steel plates, etc.

TP-16 × 10piece,Standard steel sheet1' × 6' （2.5cmx15cm）

SC-100 × 1branch, custom-made1'Wide specimen cutter