Adhesion tester

Adhesion tester

ChemInstruments of PA-1000-90Adhesive force testerIt's testing90°Adhesive forceThe machine. Adhesive force can be measured at different tensile speeds.

Applicable standards:

· PSTC 101, test method F

· ASTM D 3330, test method F

· TLMI

· AFERA 5001

· FINAT FTM2

· Can display average, highest, and lowest values

· Can display the current instantaneous numerical value

· You can choose to express it in grams, kilograms, ounces, pounds, or newtons

· load cell10pound

· The fixture platform is suitable for2' （5centimeter）Wide, to6' （15centimeter）Long test piece.

· Adjustable for test pieces of different lengthsload cellThe set value

· Three speed ranges:6 ipm （15cm/divide）, 12 ipm （30 cm/divide）, 24 ipm （60 cm/divide）

· Angle only90°

· collocationLABThe software can draw distribution graphics.

· accuracyload cellGlobal in scope± 0.1 %

· rated voltage120Vor240V

· Attention: Before plugging in, it is necessary to confirm that there is no condensed water vapor inside.

Size:

high 25inch（63.5Centimeters)

wide 18inch（45.7Centimeters)

deep 10inch（25.4centimeter）

heavy 45 pound（20.4Kilogram)

Product selection:

LABData collection system

ATAtoolkit（Recommended purchase） ,Since standard instruments have been purchased, steel plates, rollers, and cutters must also be standardized in order to truly meet the requirements. include

· TP-26 ×10The film,Standard steel sheet2' × 6' （5cmx15cm）

· HR-100 × 1Support,Standard manual rolling wheel 4.5 pound， （2kilogram）

· SC-100 × 1Support, specially designed test piece cutter, specialized cutting1Inch wide, convenient, fast, and accurate.

External computer and matching LABThe software can also achieve remote control and enhanced mode data collection functions.

TC-1000 is a special temperature control console that can measure adhesion at different temperatures (-10 degrees to 80 degrees)

Also recommended:

· AR-1000Universal adhesion testing instrumentIt is more expensive, but it can be tested simultaneously180°Adhesive forceIt can also be tested90°Adhesive forceIt can also be testedHigh speed peeling force of release paperWait.

· TT-PF-90,90°Adhesive fixture

If you already have a tensile machine, you can also buy one90°Adhesive forceThe fixture can be used to make it90°Adhesive force.