Industrial irradiation automatic test box

Industrial irradiation automatic test boxIntroduction:

It is one of the main testing instruments for aging testing of various building sealing materials. The instrument has functions such as working state memory, automatic control of temperature and water level, and timing of irradiation time. When the irradiation time is up, it can automatically shut down and sound an alarm, effectively solving the problem of electrode corrosion during water level measurement. When power is restored after an external power outage during the irradiation process, the irradiation test will automatically start and continue. The maximum operating temperature and set value can reach 65 ℃. Meets the requirements of some new standards.

Technical specifications of industrial irradiation automatic test box:

1. High pressure mercury lamp power: 300W

2. Temperature measurement range: 0-65 ℃

3. Temperature control accuracy: 40 ± 2 ℃

4. Radiation time setting: 0-999 hours and 59 minutes

5. Heater power: 600W

6. Water level control accuracy: set value ± 1mm

7. Lifespan of water level probe: greater than 5000 hours

8. Dimensions of the test chamber: 550 × 520 × 680mm

9. Controller size: 400 × 440 × 140mm

10. Sample disk size: 450 × 450mm

11. Power supply: 220VAC ± 10% 1kVA

12. Shell: All stainless steel

Maintenance and upkeep:

1. If the UV aging tester is not in operation, it should be kept dry and the power should be disconnected. 2. After the experiment, drain the water inside the testing machine and dry the workshop and box.

3. After use, remember to cover the plastic cover to prevent dust from entering. If there is dust, it should be removed in a timely manner. 4. The sensing devices in the studio should not be subjected to strong impact;

5. The UV aging test chamber should be placed in a well ventilated area (it is recommended to install a ventilation fan to maintain indoor ventilation), and should not be installed in dusty areas; 6. When there is a malfunction in the UV aging test chamber that cannot be resolved by oneself, please contact relevant personnel and do not disassemble or assemble it without authorization;