In stock 787-844 brand new WAGO Wanke power module

In stock 787-844 brand new WAGO Wanke power module

Switching stabilized power supply; PRO switch stabilized power supply; 3 phases; 24 VDC output voltage; 40 A output current; TopBoost + PowerBoost; DC OK contact; 2,50 mm²

Wanke Industrial Voltage Stabilized Power Supply

With the improvement of automation level, the demand for reliable supply of voltage and current is also increasing. Wanke's innovative high-efficiency power system can provide multiple solutions for almost any application, including communication power to basic application power.

Technical Specifications

input

phase2 / 3

Rated input voltage Ui nom(2 / 3) x 400 … 500 VAC

Input voltage range(2 / 3) x 340 … 550 VAC; 480 … 780 VDC

Rated frequency range of power grid50 … 60 Hz; 0 Hz

Input current Ii≤ 3 x 2 A (340 VAC; 40 ADC)

Connect instantaneous current≤ 30 A

Power Factor Correction (PFC)passive

Output holding time during input voltage interruption≥ 15 ms (3 x 400 VAC)

output

Rated output voltage Uo nom24 VDC (SELV)

Output voltage range22.8... 28.8 VDC (adjustable)

default settingsDC 24 V

Rated output current Io nom40 A (24 VDC)

Rated output power960W

bias≤ 1 %

Residual ripple≤ 70 mV (peak to peak)

Current limit1.1 x Io nom (typical)

Overload protection behaviorHigh power boost/power boost function/constant current mode

Power increaseDC 60 A (4 s); DC 50 A (16 s)

High power increase100 ADC (50 ms)

Efficiency/power loss

Power loss Pl≤ 7 W; ≤ 61.5 W (rated load)

Typical efficiency93.6 %

circuit protection

Internal fuse3 x T 3.2 A / 440 VAC

Spare fuse (required)An additional fuse is required for DC input.

Backup fuse (recommended)3 x Circuit Breakers: 6 A, 10 A, 16 A; Release characteristics: B or C

Alternative: Motor circuit breaker; Set point: 3.2 A; Set range: 2.5... 4 A

Safety and Protection

Isolation voltage (secondary side PE)0.7 kVDC

Protection levelI

Protection typeIP20; Compliant with EN 60529 standard

Reverse voltage withstand capability≤ 35 VDC

Overvoltage categoryII

pollution level2

Transient suppression (primary side)varistor

short circuit protectionyes

Open circuit protectionyes

Can be connected in parallelyes

series connectionyes

MTBF>500000 hours (compliant with IEC 61709 standard)

Connect 1

connection typeinput

Connection technologyCage style spring wiring unit (CAGE CLAMP) ®)

Wanke connectorWanke 231 series

Single strand wire0.08 … 2.5 mm² / 28 … 12 AWG

Thin multi strand wire0.08 … 2.5 mm² / 28 … 12 AWG

Stripping length8 … 9 mm / 0.31 … 0.35 inches

In stock 787-844 brand new WAGO Wanke power module