Welcome Customer !

Membership

Help

Shenzhen Beituo Technology Co., Ltd
Custom manufacturer

Main Products:

intelligent-mfg>Products

Shenzhen Beituo Technology Co., Ltd

  • E-mail

    Pollux@szbetteron.com

  • Phone

    13510200050

  • Address

    Room B316, Innovation Service Base Phase II, No. 126 Xia Road, Shekou Bay, Nanshan District, Shenzhen

Contact Now

German Metrotec portable oxygen analyzer

NegotiableUpdate on 04/28
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
Shenzhen Beituo acts as an agent for the German Metrotec portable oxygen analyzer.
Product Details

The new generation GSM portable oxygen analyzer from Metrotec in Germany works by measuring zirconia at a stable and controlled temperature. Zirconia can calculate oxygen partial pressure using the Nernst equation. The analyzer is equipped with an integrated sampling air pump and a touch screen for displaying the content of oxygen being measured.


Advantages and Characteristics of GSM Portable Oxygen Analyzer

Portable measurement;

◎ Touch screen display;

◎ Adjustable limit value;

◎ Adjustable range;

◎ Milliampere (mA) signal output;

◎ Lin/Log switchable;

◎ Graphic display

Application environment of GSM portable oxygen analyzer

◎ Debugging and analysis

◎ Laboratory measurement

◎ Soldering system

◎ Welding system

◎ Packaging system



Technical parameters of GSM portable oxygen analyzer

Range: 100% to 10-31 bar O2

Environmental temperature: 0... 45 ℃

Measurement accuracy: Sensor electromotive force ± 0.3 mV

Temperature ± 2 ℃

Current output: mA value ± 2%

± 2% of oxygen partial pressure

Size: 210 x 320 x 80mm (height x width x depth)

330 x 320 x 80 with handle

Weight: 3.5 kilograms


Electromagnetic compatibility: This device complies with European standard directive 89/336EC. It meets the following general standards: emission interference EN 50081-1, anti-interference EN 50082-2. The operation of this instrument is not limited by the environment and can be used in both daily living and industrial environments

Power supply voltage: 90-230VAC

Preheating time: 10 to 15 minutes

Reaction speed: about 2 seconds

Heating output: approximately 200 VA

Control output: approximately 40 VA

Measurement room temperature: 700 ℃

Temperature measurement: Thermistor Pt 10Rh Pt

Sample gas temperature: must be less than 50 ℃

Sample gas flow rate: at least 30 liters per hour

Filtration: Moisture and dust (solid particles larger than 5 μ) must be filtered

Output: Two analog outputs: 0/4.. 20 mA configurable//Three relay outputs: configurable alarm, 1A, 24 V (ohms)

Interface: Ethernet RJ45 socket, USB 2.0




德国metrotec便携式氧分析仪