gear measuring center

NegotiableUpdate on 02/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The hardware components of the gear measuring instrument mainly include: the mechanical host of the gear measurement center, the high-precision positioning grating system of the gear detection center, the micro inductance measurement sensor, the electronic digital control system of the gear detection center, the data acquisition error evaluation system of the gear measurement center, and the general microcomputer printer

Product Details

1. Working principle and purpose of the instrument

1.1 Working principle and technical description

The JE20 gear measurement center adopts the principle of electronic generation, a vertical structure layout, and utilizes the latest technologies such as high-precision shaft systems, guide rails, micrometer type inductive sensors, high-precision gratings, and numerical control systems for fully automatic measurement of gear error items. On the basis of years of producing JD series products in the company, the mechanical structure of the instrument has been further improved and optimized, adopting a new instrument appearance, upgrading the electrical and software systems, and becoming the latest generation of mature technology and high-end configuration gear measurement center products. The instrument measurement operation is simple, the measurement is efficient, the action is smooth, and it is equipped with computer error evaluation software that meets international gear error standards.

1.2 Instrument Purpose

Used for rapid detection of errors such as tooth profile, tooth direction, tooth pitch deviation, tooth pitch accumulation, radial runout, etc. in cylindrical gears.

2. Main technical parameters of the instrument

2.1 Tested gear module: 0.5 to 8 mm

2.2 The maximum outer diameter of the tested gear is 220 mm

2.3 Distance between two tips --------------------------------------------------------------

2.4 Vertical measurement range of the measuring head ----------------------------------------------------------

2.5 Maximum measurement workpiece weight -------------------------------------------------------------

2.6 Measurable range of helix angle: 0 to 90 degrees

2.7 Probe's minimum resolution: 0.0001 mm

2.8 Grating minimum resolution ------------------------------------------------------------------; X. Y and Z directions: 0.0001 mm;

2.9 Instrument indication error (standard template) --------- Involute: 2 um; Spiral: 2 um

2.10 Instrument measurement repeatability (standard template) -------- Involute: 1 um; Spiral: 1 um