-
E-mail
363343263@qq.com
-
Phone
13761626433
-
Address
A2, Building 2, Xingyuan Entrepreneurship Building, No. 666 Xincun Road, Shanghai
Product Categories
Shanghai Jingpu Electromechanical Co., Ltd
Gate opening sensor
NegotiableUpdate on 04/29
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The gate opening sensor is reliable and durable, and has been used in multiple national key hydropower projects for more than 10 years without damage to the Three Gorges Hydropower Station, Xiangjiaba Hydropower Station, and Shanghai Qingcaosha Reservoir. The sensor for gate opening is made of soft multi strand stainless steel wire rope, which can be soaked underwater for a long time every circle of travel *, with high repeatability and accuracy. It is not afraid of dust and vibration, and is sturdy and durable. It is a cost-effective method for long-distance linear measurement
Product Details
Gate opening sensordescription
-
Multi cycle GMX series encoder with SSI interface.
-
Specially designed for chip output, high speed synchronization, low latency SSI output, clock frequency up to 1MHz, delay time period, small edge size, long transmission distance, and stable connection to various SSI standard interfaces.
| Technical Specifications | ||
| Working Voltage | 10~30V | |
| Current consumption (no-load) | 24V:<50mA | |
| output signal | SSI | |
| code system | Gray code | |
| resolution | 12bit /4096 | |
| Continuous number of turns | 1~4096 | |
| Total resolution | 24bit | |
| repeatability accuracy | ±2BIT | |
| Clockwise speed | ≤500KHz | |
| material | shell | aluminium |
|
| flange | aluminium |
|
| axis | aluminium |
| Allowable speed | 2400 min-1 | |
| anti-vibration | 20g，10~2000Hz | |
| impact-resistant | 100g，6ms | |
| Operating Temperature | -25~80 ℃ (-40~80 ℃ optional) | |
| Storage temperature | -40~80℃ | |
| Protection level | Housing IP67 | |
|
| Shaft IP65 | |
| connection type | Shielded cable 1m | |
|
| Other forms are optional | |
Order model:
Shanghai Jingpu Electromechanical Co., Ltd. is a technology-based industrial enterprise that integrates research and development, production, and agency of stainless steel heavy-duty encoders, heavy-duty value encoders, through-hole incremental encoders, high-precision value encoders, and other products. The company is mainly committed to the research and development, production, and agency sales of rotary encoders and supporting instruments, mechanical sensors, and encoders and other products from Germany and other countries.
Gate opening sensorInstallation, use and precautions:
1. This sensor belongs to an instrument, and it is strictly prohibited to strike or collide during installation.
2. Sensors and external connections should avoid rigid connections and instead use couplings, connecting gears, or synchronous belts for transmission.
3. During installation, pay attention to the allowable axle load and do not exceed the limit load.
4. Be careful not to exceed the limit speed of the encoder, as the electrical signal may be lost if the limit speed is exceeded.
5. The wiring must be correct, as incorrect wiring may cause damage to the internal circuit of the sensor.
6. Please do not wind the output line of the sensor together or transmit it in the same pipeline as the power line, and it should not be used near the wiring board to prevent interference.
