Float water level height sensor

NegotiableUpdate on 04/29

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Introduction to flood discharge gate sensor and float water level height sensor: The float steel wire rope and heavy hammer steel wire rope are separated and wound multiple times without sliding or wear. The float measuring steel wire rope is horizontally arranged in the cable slot of the measuring wheel, and is naturally arranged by gravity. The entire measurement range is linear with the same stroke every n turns. The float wire rope measuring wheel and the heavy hammer wire rope disc are of different sizes in proportion. But the same axis $n is directly linked with the encoder $n ★ through a coupling, reducing the connection error to Z small The stroke of the heavy hammer decreases proportionally with respect to the water level. The steel wire rope and float are both made of stainless steel material, which is optional for seaside measurements

Product Details

Float water level height sensorFeatures:

★ The float steel wire rope and the heavy hammer steel wire rope are separated and coiled multiple times, and the steel wire rope has no sliding or wear.
The float measuring steel wire rope is horizontally arranged in the cable groove of the measuring wheel, and the wire is naturally arranged by gravity. The travel of each circle is the same, and the entire measurement range is linear.
The float wire rope measuring wheel and the heavy hammer wire rope disc are of different sizes in proportion. But on the same axis and directly linked with the encoder through a coupling,
★ Its connection error is minimized to the smallest extent possible The stroke of the heavy hammer decreases proportionally with respect to the water level.
The steel wire rope and float are both made of stainless steel material. For coastal measurements, anti seawater immersion stainless steel material can be used.
★ Easy installation and maintenance, long service life

Note: The GPH1000 can be modified to measure up to 40 meters in length and can also be used for long-distance displacement measurement in other industries, connecting moving objects with measuring wheels and steel wire ropes.

Size chart

Output format and parameters:(Please refer to the instruction manual for specific electrical parameters)

Value simulation current output type:

model	measurement stroke	Working Voltage	output signal	Linear accuracy	wire rope diameter	remark
GPH500-L	500mm12000mm	10～30Vdc	4～20mA	0.2%FS	1.50mm	Jieanpu Multi Circle Encoder

Note 1: Larger measurement ranges can be reserved.

Value SSI output type:

model	measurement stroke	Working Voltage	output signal	resolution	wire rope diameter	remark
GPH500-S	500mm12000mm	10～30Vdc	Value SSI Gray Code	0.0625mm	1.50mm	Jieanpu Multi Circle Encoder

Other encoder signal output types are available: RS485, Modbus RTU, Profibus DP, CANopen. Rainproof cover can be ordered for outdoor use

Float water level height sensorNotes:

1. Handle with care (as the float switch is a reed switch, it is fragile and should be used with caution)

2. Attention to usage temperature: PP plastic should be within 80 degrees Celsius, and stainless steel should be within 150 degrees Celsius.

3. Try to avoid vibration, magnetic fields, or exceeding the maximum temperature for a long time in the usage environment.

4. The liquid used should avoid being too viscous.

5. Regularly clean the dirt on the connecting rod and floating ball (the cycle depends on the medium).