EMOTRON Axis Power Monitor Emotron M20

Product Name:EMOTRON Axis Power Monitor Emotron M20

Product Model:Emotron M20

Product Introduction:

The Emotron M20 axis power monitor protects your pumps and other equipment from damage and shutdown. Early warning allows for preventive measures to be taken, thereby reducing maintenance costs and improving reliability. Using motors as sensors also reduces installation costs.

EMOTRON Axis Power Monitor Emotron M20 Performance Characteristics:

● Shaft power monitoring

Emotron M20 can immediately detect overload and underload caused by pump dry operation or crusher blockage. The technology of calculating shaft power can achieve accurate and reliable monitoring throughout the entire load range.

High precision with expandable output signals

Even with very small load changes, a special function can provide high accuracy. The analog current output signal can be used to scale the machine load to the actual operating range. This signal can be used as an indicator instrument, controller, orInput of PLC.

Enter settings within three seconds

The Emotron M20 uses automatic setting function to set four protection setpoints in just three seconds. During normal operation, pressing the automatic setting will automatically calculate warning and stop levels based on the measured actual motor load.

Low cost installation and zero maintenance

Using motors as sensors eliminates the need for external sensors and additional wiring, as well as drilling holes in pipelines. The result is improved reliability and reduced investment, installation, and maintenance costs.

Technical Specifications:

The Emotron M20 axis power monitor provides advanced multifunctional monitoring through two output relays, an analog output, and a display for load indication and parameter settings.

Power supply: 100-240 VAC/380-500 VAC/525-690 VAC

● Frequency: 50 Hz/60 Hz

Rated current:max.999 A (requires additional current transformer>100 A)

● Protection level: IP20

Certification: CE, UL, cUL

Installation: 35mm DIN rail 46277

Weight: 0.30 kilograms (10.5 ounces)

● Power consumption:max6 VA

● Startup delay: 1-999 seconds

● Lag: 0-50% of the rated power of the motor

● Response delaymax：0.1-500 s

● Response delaymin：0.1-500 s

● Analog output:maxload500 ohms

● Fuse:max10 of them

Terminal tightening torque: 0.56-0.79 Nm (5-7 pound inches)

Repeatability: ± 1 unit for 24 hours+20 ° C (+68 ° F)

● Temperature tolerance:max0.1%/°C

● Operating temperature: -20 to+50 ° C (-4 ° F to+122 ° F)

Storage temperature: -30 to+80 ° C (-22 ° F to+176 ° F)

● Origin: Sweden