EJA118E diaphragm sealed differential pressure transmitter

NegotiableUpdate on 03/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The JA118E diaphragm sealed differential pressure transmitter is suitable for measuring the flow rate, liquid level, density, and pressure of high and low temperature, high vacuum, high viscosity, and easily crystallizable media. It converts differential pressure into 4-20mA DC current signal output. Please feel free to inquire for more information.

Product Details

　　EJA118E diaphragm sealed differential pressure transmitterAlso known as the double flange differential pressure transmitter, it adopts monocrystalline silicon resonant sensor technology and is suitable for measuring the flow rate, liquid level, density, and pressure of high and low temperature, high vacuum, high viscosity, and easily crystallizable media. It converts the differential pressure into a 4-20mA DC current signal output and can measure, display, or remotely monitor static pressure. It has functions such as fast response, remote setting, and self diagnosis. The EJA-E series products offer BRAIN, HART/HART (1-5VDC) low-power type, FF fieldbus, and PROFIBUS PA communication protocols, with standard configuration certified with SIL 2 safety.

Output: 4-20mA HART/BRAN (output signal code D&J); Two wire system with digital communication, 4-20mA DC output, can be set as linear or square root. The BRAN or HART FSK protocol is loaded on a 4-20mA signal, with an output range of 3.6mA to 21.6mA. To comply with NAMUR NE43, output limits can be pre-set through option codes C2 or C3.

1-5V HART (output signal code Q); three wire or four wire system 1-5V low-power type can be set to linear or square root. The HART protocol is loaded on a 1-5 V signal, with an output range of

Surrounding 0.9-5.4VDC

Power supply voltage:

4-20mA HART/BRAN (output signal code D&J)

10.5~42V DC ordinary type and explosion-proof type

10.5-32V DC with lightning protection (option code/A)

10.5~30V DC intrinsic safety, n-type, non flammable type

● Digital communication (BRAIN and HART): * Small 16.6V DC; 1-5V HAR Ding (output signal code Q)

9-28V DC ordinary type and explosion-proof type

Environmental temperature -40~85 ℃ (-40~185 ° F); -30~80 ℃ (-22~176 ° F) with LCD meter head

Note: The environmental temperature limit must be within the working temperature range of the injected fluid, as shown in the model and specification code table.

　　EJA118E diaphragm sealed differential pressure transmitterSelection reference:

For detailed information, please go to the "Data Download" section on the website homepage to download and select.