Drum cable

Drum cableIntroduction:

Built in high-strength aviation galvanized steel wire, flat and circular lifting equipment, cable crane, dedicated cable bucket, wheel machine, dedicated cable mixer, dedicated cable hoist, cable traveling cable, steel wire cable, crane cable; Widely used in the connection and control cables of heavy machinery and equipment such as construction vertical elevators, port gantry cranes, container cranes, ship loaders, unloaders, large gantry cranes, tower cranes, etc.

■ Parameters

Product Name: Dragging Systemcable
Conductor: 99.9999% annealed oxygen free copper; Compliant with VDE0295, Class 6 single filament diameter 0.1mm
Insulation: Modified PVC/Polyether PUR
Sheath: Modified PVC/Polyether PUR
Structural form: Squeezed tight structure contracting
Production standard: German VDE standard

■ Performance
Voltage level: below 1000V
Operating temperature: -55 ℃~105 ℃
Product features: oil resistance, bending resistance, UV protection, waterproofing, etc.
Outer diameter control: according to specifications or customer requirements;
Core wire differentiation: based on color or printing.

Drum cableInstallation precautions

‍

1. The laying of drag chain cables cannot be twisted, that is, the cable cannot be untied from one end of the cable drum or cable reel. Instead, the drum or cable reel should be rotated first to unfold the cable, and if necessary, the cable can be unfolded or hung up. The cable used for this occasion can only be obtained directly from the cable reel.

2. Attention must be paid to the minimum bending radius of the cable, and the installation radius should not be less than 6 times the diameter of the cable.

3. The cables must be laid loosely side by side in the drag chain, separated as much as possible, separated by spacers or inserted into the separation holes of the bracket. The gap between the cables in the drag chain should be at least 10% of the cable diameter.

4. The cables in the drag chain must not come into contact with each other or get stuck together.

5. Both points of the cable must be fixed, or at least fixed at the moving end of the drag chain. The distance between the moving point of a general cable and the end of the drag chain should be 20-30 times the diameter of the cable.

6. Please ensure that the cable moves within the bending radius and cannot be forced to move. In this way, the cables can move relative to each other or to the guiding device. After a period of operation, it is best to check the position of the cable. This inspection must be conducted after the push-pull movement.

7. If the drag chain breaks, its cable also needs to be replaced, as damage caused by excessive stretching cannot be avoided.