DSP-LBCM03A Test Coating Machine DSP-LBCM03A

mechanical properties

DSP-LBCM03AExperimental coating machine

1、 Product Introduction:

The DSP-LBCM03A experimental small coating testing machine is carefully designed for coating wet films on different substrates. It can repeatedly and continuously prepare smooth, flat, and defect free test samples. After being put into the market, the equipment has been favored by many well-known enterprises, research and development institutions, and colleges and universities.

2、 Product Features

1. The experimental speed, pressure, and coating length can be adjusted, and both coating rod coating and scraper coating can be achieved. The operation is more convenient, the application range is wider, and the coating accuracy is higher

2. The machine can be equipped with heating and vacuum adsorption functions, which can quickly dry samples and smoothly adsorb special materials, while also coating materials with temperature requirements.

3. Coating panel heating, good heating effect, can be preheated in advance before coating

4. Four sided film maker with high coating accuracy and strong consistency

3、 Technical parameters

1. Vacuum disk size: 200X150mm

2. Coating size: 120X60mm

3. Coating method: Four sided scraper coating (customer specified coating thickness to make four or six sizes of scraper)

4. Coating accuracy: Four sided scraper 0.002mm

5. Vacuum disk smoothness: 0.01mm

6. The coating area is a highly smooth surface