DC110V input power supply HFC100-W/O series 87672401228

DC110V input power supply HFC100-W/O series 87672401228

Electrical insulation

Single output（12 or24V）

Chassis assembly

Over temperature shutdown

10msPower outage bridging

External shutdown

Anti short circuit and anti no-load protection

redundancy -Parallelizable

Overvoltage protection in the output circuit, external power supply can also be used for positive output (OVP)

Immersion paint assembly

Fix components by bonding to prevent vibration

Temperature range:-40°Cto+85°C

European Railways (EMC)

DC110V input power supply HFC100-W/O series 87672401228

AUTRONIC DC/DCconverterHFC100-W - 100Tile, suitable for railways, etc

AutronicRailway power converterHFC100-Wseries87672401228

AutronicpassHFC100-WRailway compatibility with wide inputDC/DCConverter series.

The output power is 100 Wa's converter provides14.4…154VDCThe input range has been established and set a standard among similar products.

All requirements used in railway technology are focused on small areas and graphic design

Obtained implementation.

Therefore,AutronicEffectively achieved efficiency92%The plug and play solution simplifies the design.

Meet railway specific requirements without the need for additional wiring through external components EMCrequirement

Other functions include active surge current limitation (10A)Active reverse polarity protection, as well as overvoltage, overheating, and overcurrent protection.

Integrated power supply fault bridging is a natural thing to do, adjust the output voltage (±10%)The possibility of running up to three converters in parallel is also the same.

The input voltage in Europe is covered by a converter, which simplifies the design and simplifies the approval process for customer applications.

Electrical insulation HFC100-WIt is based on the temperature levelTXDeveloped, available in70°CAt the temperature100W

Operate at high power without the need for derating 85°CAt least at the required temperature10 minute In addition to natural convection,

AutronicThe simple installation of the converter only requires three small solder pads at the bottom to dissipate the generated heat, and complex heat sinks are unnecessary.

The selection of printed circuit board materials is based on the fire resistance testing conducted.

Besides having 12Vor24VIn addition to the open framework solution for output voltage, there are two other options available,

A type with IP20Shell, another type used forDINInstallation of guide rails. Other output voltages can be provided upon request.