Adhesive bracket for emulsified asphalt

NegotiableUpdate on 02/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Emulsified asphalt adhesion bracket, this bracket is used to assist in the inspection of the adhesion between various emulsified asphalt and coarse aggregate surfaces, suspend test specimens to evaluate the water resistance and peeling ability of coarse aggregates, and comply with the standard requirements of T $r $n0654-2011 adhesion test between emulsified asphalt and coarse aggregate in JTG E202011 "Test Code for Asphalt and Asphalt Mixtures in Highway Engineering".

Product Details

Adhesive bracket for emulsified asphaltTest the surface adhesion of coarse aggregate suspension specimens for highway engineering

1、 Product Introduction

Adhesive bracket for emulsified asphalt，This bracket is used to assist in testing the adhesion between various emulsified asphalt and coarse aggregate surfaces,Hanging test specimens to evaluate the water stripping resistance of coarse aggregates, in accordance withJTG E202011In the "Test Regulations for Asphalt and Asphalt Mixtures in Highway Engineering"T

0654-2011Standard requirements for adhesion test between emulsified asphalt and coarse aggregate.

2、 Technical parameters

1Number of workstations:5

2External dimensions:360×210×510MM

3Net weight:3.5KG

Fiber abrasion testerYMH-XW5Fiber abrasion tester for asphalt pavement

1、 Product Introduction

The fiber abrasion tester is designed according to the transportation industry standardsJT/T533-2020Appendix to "Fibers for Asphalt Pavement"LThe relevant requirements for the screening and abrasion test method of granular wood fibers are designed and manufactured. This abrasion tester places granular wood fibers in a grinding system for a specified period of time, and then the vibrating screen system starts working to screen the ground fibers, thereby completing the quality analysis of the granular wood fibers after grinding and screening.

2、 Technical parameters

1Grinding wheel diameter:280mm

2Grinding wheel thickness:4mm

3Grinding and curling length:50mm

4Grinding curl width:15mm

5Grinding and curling angle:30°

6Distance between grinding wheel and grinding chamber sidewall:48mm

7The distance between the grinding wheel and the grinding chamber in the diameter direction:10mm

8Grinding wheel speed:500r/min

9Vibration frequency of vibrating screen system:50Hz

10Vibration amplitude:2mm

11Mesh size specification:2.8mmand4mm

12Weighing sensor range:0-3000g

13Weighing resolution:0.1g

14、7Inch color touch screen control and display, capable of measuring the weight of fibers on the screen; Automatically calculate the fiber quality pass rate value and the quality pass value after abrasion. Automatically store print data results

15Equipped with a micro printer to print results

16Power supply:220V50Hz, Power1kw

17External dimensions:700×400×750mm

18Weight: Approximately95kg