AI-6016/6032NPN temperature output intelligent controller

AI-6016/6032NPN temperature output intelligent controllerFeatures:

1. AI-6016NPN is a temperature control board with 16 NPN outputs, which can be used with thermocouple or thermistor input temperature acquisition modules. It uses a dedicated protocol to meet fast communication requirements; It does not have input function and needs to be based on Yudian ALINK networking technology, combined with Yudian measurement and acquisition module to form a complete controller.

2. AI-6032NPN is a temperature control board with 32 NPN outputs, which can be used with thermocouple or thermistor input temperature acquisition modules; Supports processing 32 independent PID control loops simultaneously.

AI-6016/6032NPN temperature output intelligent controllerTechnical Specifications

● Communication method:

Bottom RS485 bus terminal; Support MODBUS-RTU protocol; The baud rate is adjustable from 4800 to 115200;

The bottom RS485 bus terminal can be connected to our TCP-MODBUS and EtherCAT communication controllers, supporting relevant communication protocols;

The internal dedicated communication protocol is used between the host, slave, and expansion module, with a reliable communication distance of 30m

Communication delay: When connected in series, the communication delay of each input or output expansion module node is about 10mS (including data transmission time);

● Input specifications: For technical specifications, please refer to the relevant extended input module.

● Control cycle: minimum 20mS (single loop control); When there are multiple circuits, each circuit takes up 10mS of time;

Adjustment method: Positional adjustment method (adjustable hysteresis) AI artificial intelligence adjustment, including advanced control algorithm manual control mode with fuzzy logic PID adjustment and parameter self-tuning function

● Output specifications:

NPN switch output: maximum voltage 28V, maximum current 100mA. When driving the relay coil, a fast recovery diode must be connected in parallel with the relay coil to absorb reverse voltage. When using an external extended output module, please refer to the relevant module instructions for technical specifications

● Alarm function: upper limit, lower limit, deviation upper limit, deviation lower limit and other methods

Electromagnetic compatibility: IEC61000-4-4 (electrical fast transient pulse group) ± 6KV/5KHz, IEC61000-4-5 (surge) 6KV, and under 10V/m high-frequency electromagnetic field interference, the instrument does not crash or I/O port misoperation, and the measurement value fluctuation does not exceed ± 5% of the range

● Isolation and voltage resistance: The power supply terminal, relay contacts, and signal terminals are ≥ 2300V between each other; the weak current signal terminals that are isolated from each other are ≥ 600V between each other

Power supply: 24VDC, -15%,+10%

Power consumption: ≤ 0.3W (without any output or external feeding energy consumption); The maximum power consumption of the whole machine is ≤ 3W

● Operating environment: Temperature -10~60 ℃; Humidity ≤ 90% RH