The initial adhesion tester is a testing instrument used to check whether the insulation performance of a machine meets the pressure it should withstand under high voltage. So how to use thisInitial adhesion testerHow to maintain this instrument?
Initial adhesion testerThe key points for maintenance and upkeep are as follows:
1. State adjustment: Before preparing the sample, the sample roll (piece) should be separated from the packaging material and placed in a specified temperature and humidity environment without overlapping for more than 2 hours.
2. Experimental environment: Strictly follow the relevant product standards.
3. Cleaning: Keep the machine clean at all times. The tape adhesion tester should be wiped with a cotton cloth before and after each use to keep it clean.
4. Rust prevention: Spray rust prevention oil on the metal parts of the machine surface once a week (wipe clean after spraying for 2 hours).
5. Lubricating oil: The tape adhesion tester regularly adds lubricating oil (using ordinary lubricating oil) to the transmission components (such as screws) of the machine every month.
The above is about the use, maintenance, and upkeep of the initial adhesion tester, hoping to provide assistance for everyone's use.
