Bar electronic scale is an electronic platform scale used for tray weighing. It is equipped with handles and wheels, and is mobile. The system consists of a bar electronic weighing platform, a shear beam high-precision sensor, a junction box assembly, and an intelligent weighing instrument. It has the characteristics of fast weighing, high accuracy, and easy movement, and is applied in the logistics and warehousing industries.
The strip electronic scale is equipped with 4 shear beam type weighing sensors and intelligent weighing instruments. The system has high accuracy level, fast weighing, easy operation, convenient movement, stable and reliable operation, and is suitable for long steel bars, wood and other materials.
Notes:
1. This product cannot be overloaded and should be weighed specifically for use. Pay attention to the humidity and powder layer in the operating environment.
2. It is prohibited to perform arc welding operations on the weighing platform. If arc welding operations must be performed on the weighing platform.
3. Maintain good weighing habits during use. During the weighing process, try to place the goods in the middle position of the electronic weighing scale, so that the four sensors of the weighing scale can balance the force. Do not weigh in one corner frequently for the sake of convenience, which may cause uneven force on the sensor and affect the service life of the electronic weighing scale.
4. When the weighing display controller is not used for a long time (such as more than a month), it should be powered on and checked according to environmental conditions to avoid moisture or other adverse gas erosion that affects reliability; Electronic buffering should not be left in outdoor environments for too long, especially not exposed to rain; Keep the operating environment dry.
5. The same phase line connected to the electronic weighing scale must not be connected to inductive loads, such as doorbells.
6. Avoid getting close to heat and vibration during use.
7. Due to the potential threat of rodent infestation in many usage scenarios, some areas of the signal of the bar electronic scale are exposed, so it is necessary to strictly prevent rodent infestation.
8. Regularly clean the debris next to the sensor to avoid touching the weighing sensor, causing inaccurate weighing, jumping, and other phenomena.
9. Regularly check whether the wiring is loose, broken, and whether the grounding wire is secure.
10. Regular maintenance of surface paint to prevent rusting and affecting its lifespan.
11. Regularly check whether the limit clearance is reasonable, whether the scale body is in contact with other objects, collisions, etc.
12. Regularly clean the rust on the sensor screws to avoid causing changes in sensor resistance and affecting weighing.
13. Regularly check the position of the scale angle screw to see if it is within the normal range of use.
14. If the weighing display malfunctions, it should be quickly powered off. If the cause of the malfunction cannot be accurately determined, our professional engineers should be notified for inspection and organization. Users are not allowed to open the chassis or replace internal parts at will.
15. Both electronic weighing scale operators and instrument maintenance personnel need to undergo specialized training in order to engage in operation and maintenance.