servo drive

Title: AL-00490833-01 Shanyang&Sanyo Servo PC Communication Cable Suitable for R and Q Series RS1A01AA RS1A03AA RS1A05AA
Price: 210
Model: AL-0049083-01
Description:

Shanyang servo drives use cable connections, corresponding to the original factory model AL-00490833-01, which can match all R and Q series servo drives as long as the connectors are the same as those shown in the diagram below. With the tuning line, it is easy to set parameters and adjust them online, which is more suitable for importing parameter setting tables during batch production in factories. For maintenance friends, it is even more enjoyable to replace the drive by directly importing the parameters of the faulty drive and then inputting them into the new drive. It takes 3-5 minutes to complete the process, and there is no need to copy down each parameter one by one. Press them one by one, it's really cool!!!
Through this data cable, functions such as parameter setting, monitoring, alarm history, manual operation, system analysis, etc. can be performed from the PC computer end. If adjustment software is required, it can be downloaded from the website or sent online by contacting us The Q-Setup and R-Setup software, as well as the instruction manual PDF documents, will be transmitted online after payment.
Tested for use with R and Q series.
RS1A01AA RS1A03AA RS1A05AA RS1A10AA RS1A15AA，RS1L01AA RS1L05AA RS1L10AA RS1L15AA
QS1A01AA QS1A03AA QS1A05AA QS1A10AA QS1A15AA， This cable is suitable for all!

The appearance of the adjustment line is as follows:
Length: 2.8~3 meters
Connector: PC side standard DB9 female connector, connected to desktop or laptop COM serial port; The servo drive side is a flat 12 pin PCB plug, please refer to the following figure.
Inspection: This online production line has already passed the actual drive test before shipment. Test platform: Laptop RS232 serial port+Sanyo QS1A03AA driver
Note: This line has been tested and approved before shipment. If it cannot be connected online, please check whether the communication baud rate, checksum, and stop bit settings on the servo side are the same as those on the PC side, or whether the COM serial port on the PC side can be used. In addition, regarding the use of the tuning software, please study and research on your own. We do not provide technical support for use.

Backup battery absolute value encoder, optical battery free absolute value encoder, thin optical multi ring encoder, high-precision optical multi ring encoder, thin optical single ring encoder, incremental encoder, provincial wiring incremental encoder, coil, battery free absolute value encoder, power unit, connector, USB communication cable, inter drive communication cable, upper device inter drive communication cable, MODBUS communication cable, terminal connectorservo driveConnecting copper bars between unitsservo driveUnit to unit connection cable, analog monitor monitoring module, external regeneration resistor, front installation fixture, connector kit, servo motor relay cable, CN1 connector, CN4 connector, EN1 connector, EN2 connector