SANYO DENKI servo motor

NegotiableUpdate on 04/29

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

SANYO DENKI Sanyo DC servo motor T850B-012EL6 T850T-012EL8 U835T-112E46 DC motor (direct current machine) refers to a rotating motor that can convert DC electrical energy into mechanical energy (DC motor) or mechanical energy into DC electrical energy (DC generator). It is a motor that can convert DC electrical energy and mechanical energy into each other. When it operates as an electric motor, it is a DC motor that converts electrical energy into mechanical energy; When operating as a generator, it is a DC generator that converts mechanical energy

Product Details

The signal from Shanyang Electric is as follows:

T850T-012EL8 T850B-012EL6 T840-012E59 T720-012E59 T511T-012EL8 U835T-112E46 T406-011E16 T406-011EL8

The directions are from b to a and from d to c. At this point, brush A has a positive polarity and brush B has a negative polarity.

Figure 1.1 Principle Model of DC Generator

When the coil rotates counterclockwise by 180 °, conductors c and d are located below the N pole, and conductors a and b are located below the S pole. The electromotive forces in each conductor change direction.

Figure 1.2 Principle Model of DC Generator

From the figure, it can be seen that the conductor in contact with brush A is always located below the N pole, and similarly, the conductor in contact with brush B is always located below the S pole. Therefore, brush A always has a positive polarity, and brush B always has a negative polarity, so the brush end can lead out a pulsating electromotive force with a constant direction but varying magnitude. If the number of coils on the armature increases and they are connected according to a certain rule, the degree of pulsation can be reduced, and a direct current electromotive force can be obtained. This is the job of a DC generator