dryspin® Flange screw nut, large pitch thread, JFRM

NegotiableUpdate on 03/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

dryspin Flange screw nut, large pitch thread, JFRM $n material: iglidur J $n thread direction: right-handed thread $n thread type: dryspin Large pitch thread design: standard cylindrical screw nut with flange

Product Details

dryspin ® Flange screw nut, large pitch thread, JFRM

Material: iglidur ® J

Thread direction: right-handed thread

Thread type: dryspin ® Large pitch thread

Design: Standard

Cylindrical screw nut with flange

dryspin ® Flange screw nut, large pitch thread, JFRM

General performance

material	iglidur® J
Thread direction	right-hand thread
thread type	dryspin ® Large pitch thread
density	1.49 g/cm3
color	yellow
Maximum moisture absorption (at 23 ° C/73 ° F, 50% relative humidity)	Weight 0.3%, test method DIN 53495
Maximum water absorption rate	1.3% of weight
Sliding friction coefficient, dynamic, matched with steel	0.06 - 0.18 m
PV value, maximum value (dry run)	0.34 MPa ⋅ m/s

size

thread	DS10x3
Ø d1	10.00 mm
Ø d2	25.0 mm
Ø d3	42.0 mm
d4	34.0 mm
Ø d5	5.0 mm
b1	25.00 mm
b2	10.0 mm

mechanical properties

Elastic modulus	2.400 MPa， Test method DIN 53457
Bending strength (at 20 ° C/68 ° F)	73 MPa， Test method DIN 53452
Pressure load	60 MPa
Maximum recommended surface pressure (+20 ° C/68 ° F)	35 MPa
Shore D hardness	74. Test method DIN 53505

Physical and thermal properties

Maximum temperature during continuous operation [° C]	90 °C
The highest temperature during brief operation	120 °C
Lower limit of working temperature	-50 °C
thermal conductivity	0.25 W/(m ⋅ K)， Test Method ASTM C 177
Thermal expansion coefficient (23 ° C/73 ° F)	10 K-1⋅ 10-5Test method DIN 53752

Electrical Information

Bulk resistivity	> 1013Ω cm, test method DIN IEC 93
surface resistance	> 1012Ω, test method DIN 53482

application requirements

According to DIN EN ISA 846 procedure A, there is no mold