Rod end, with internal thread, KBRM CL， Stainless steel sleeve

Rod end, with internal thread, KBRM CL， Stainless steel sleeve

Integrated locking nut with internal thread for rod end bearing, easy to assemble

Molded nuts can be directly locked

iglidur ® W300 ball bearings

There is a stainless steel sleeve that can provide higher tightening torque

right-hand thread

igumid ® G base

K series dimensions comply with DIN ISO 12240 standard

Rod end, with internal thread, KBRM CL， Stainless steel sleeve

Igubal with internal thread ® rod end bearing

igubal ® The rod end is corrosion-resistant and can be used in harsh environments. In humid environments, they are resistant to corrosion, weak acids, and alkalis. Their resistance to dirt and dust is also excellent.

The bearing seat is made of igumid G, a long fiber reinforced engineering plastic with high impact resistance. Suitable for long-term use at temperatures ranging from -40 ° C to+90 ° C

In standard ball bearings, the ball is made of iglidur ® Made of W300 material, this material is known for its low friction coefficient and extremely low viscosity during dry operation. This is particularly important for low loads and very slow movements. The model with stainless steel sleeve in the sphere can provide higher tightening torque.

Maintenance free dry operation

Cost effectiveness ratio*

No lubrication

high rigidity

Durability with * under different loads

Deviation error compensation

Edge load compensation

Resistant to dirt, dust, and fibers

Corrosion resistance and chemical properties

Can be used for liquid media

Excellent vibration damping performance

Suitable for rotational, swinging, and linear motion

The inner ring is fixed in the bearing seat with a small gap

Very lightweight

Typical application areas

Bicycle manufacturing

factory building

Packaging industry

at sea

There are more application areas here: industry solutions

Applicable occasions:

If you want to reduce weight

Used for rotational, swinging, and linear motion

If high-frequency oscillation/vibration occurs

If low-noise operation is required

If electrical insulation components are required

If corrosion resistance is required

Used in combination with pneumatic cylinders and columns

If chemical resistance is required

If high rigidity is required

Not applicable for:

If the temperature exceeds+90 ℃

If a speed higher than 0.5 meters per second is required

If there are very high tensile and axial forces

When the application plans to use hydraulic cylinders

If a diameter exceeding 30 millimeters is required

Use our filter options to find suitable products

tolerance

igubal ® Bearing components can adopt different tolerances according to different applications. They are designed for standard products with large bearing clearances, ensuring safe operation even at high circumferential speeds. The hole in the inner ring has a standard tolerance range of E10. The shaft should also comply with the recommended tolerances H6 and H9. Check the inner diameter

Sliding friction coefficient and velocity

Maintenance free igubal ® An important advantage of spherical bearings is that the installation shaft can be directly installed on iglidur ® The spherical part made of material rotates rapidly. The advantage of this plastic/steel sliding bearing configuration is that it can achieve high speed even during dry operation. Taking into account the radial load, it is possible to achieve a maximum surface velocity operation of up to 0.5 meters per second. On the contrary, the angular motion of a spherical bearing occurs at the outer diameter of the sphere. Maintenance free igubal ® Bearing components also allow for linear motion of the shaft.

igubal ® Chemical resistance of bearings

iglidur ® The ball made of W300 and the bearing seat made of igumid G are resistant to weak alkali, weak acid, and fuel, as well as all types of lubricants. Under standard climatic conditions, igubal ® The water absorption rate of spherical bearings is about 1.3% of normal weight. The saturation value immersed in water is 6.5%. It must be considered based on the environmental conditions at that time. If lower moisture absorption is required, it is necessary to consider other available materials.

UV resistant

igubal ® Their corrosion resistance makes them suitable for outdoor applications. igubal ® Bearings are resistant to ultraviolet radiation. The slight changes in the color of the sphere due to ultraviolet radiation and other climatic conditions (dark coloring) do not affect its mechanical, electrical, or thermal properties.